NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002

NORMAL PLAYBACK

Normal PlaybackTracking Control

1 Turn on the power to the IfVCRthereand TVis noisemonitorin.the image during

 

 

1 While looking at the playback pic

2 Load the video cassette tape.

 

3 PressREC/PLAYthe

 

TRACKING+button repeatedly to minimi

lSPEEDbutton to select the

 

playback speed mode.

noise.

 

2 If it cannot be TRACKINGminimized,–

press

ø The selected playback speed mode is

button repeatedly.

 

 

 

 

displayed on the digital display.

NOTE:

NOTES:

œ This function does not operate when a

 

œA slow motion effect or accelerateddisplay appearslaybackon the digital display effect can be achieved by using a slower or faster

playback speed than the speed used for recording.

Vertical Lock Control

œ If the playback speed“000”, mode is set to

During still image mode,

playback (step 4) will not be possible.

4PressPLAYthebutton.

øPlayback starts.

øIf necessary, adjust the tracking to eliminate the noise from the picture.

øIf the image is unstable (rolling vertically), adjust the vertical lock control to correct.

1 PressTRACKING+the button repeatedly to r the vertical rolling of the image

2 If it cannot beTRACKINGcorrected,–press

button repeatedly.

NOTE:

œThis function does not operate when a display appears on the digital display

5 To stop playback,STOPbuttonpress.

the

 

ø To advance (or rewind) the tape, press the FF

Audio Playback

(or REW) button.

œ Audio playback is only possible in 8-

 

NOTES:

40-hour modes “TAPE”(orin when(GENERALthe

SET) menu is set to “T-120”, in 6-hour, 18-hour and

 

œ A tape recorded on a real time video

cassette

 

30-hour modes).

 

recorder produced by another manufacturer may not

œ The playback speed has to be the same

play back with the same degree of clarity on this unit. recording speed, for normal playback o

œ When used with a multiplexer in 24- or 40-hour mode playback (or“TAPE”whenin (GENERALthe SET)

menu is set to “T-120”, in 18- or 30-hour mode playback), the image may roll vertically. In such a case, set “VERTICAL SYNC” to “N” in menu (GENERAL SET) menu.

œ When a tape recorded with a time lapse VCR is played back, the playback speed mode display and playback time may be different due to the recording speed mode.

English

35