SECURITY LOCK
The security lock function is designed to prevent accidental stopping of recording if theSTOP button is pressed inadvertently.
mode.
ø “T/D SEARCH 01 00:00” will be displayed on screen.
2 Pressl the(orj) button to set then pressENTERthebutton.
3 Pressl the(orj) button to set then pressENTERthebutton.
4 Pressl the(orj) button to set
NOTES:
NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002
DAY/TIME SEARCH
Day/Time Search
This searches for a specified day/time for still images to be played back.

NOTES:

œ If the end of the tape is reached dur tape will rewind and stop. If the beg

1 PressSEARCHthebutton three times during stop

is reached, it will stop.

œ The alarm and day/time data are record in a similar format. If they overlap, have the priority. Therefore, when se

day/time when an alarm recording was d the desiredday/timeday,search will not stop at the

such a case, use alarm scan to find th

recording location. the desired hour,

œ The day/time search function may not

correctly if searching for a timer re the desired minutes.

the clock on the recording VCR has be using the CLOCK ADJUSTMENT function.

œ The setting can be made inœ 10If minutesarecording on a tape extends for

increments only.period, the same day may be present t

tape. If such a day is searched, sinc

œ For recordings made on other VCRs, the exact

month search setting, the desired day

time may not be found even if the minutes are found.

entered. For tapes recorded on older models of

VCRs produced by this companyœThis(thefunctionones does not operate when a without a minutes setting fordisplaythe day/timeappears onsearchthe digital display function), make sure“00”to. set the minutes to

5PressFF (ortheREW) button.

øThe desired day/time is searched and a still image of the recording will appear on-screen.

6PressPLAYthebutton.

øPlayback will start.

NOTES:

œ While the security lock is engaged al

except the one to cancel the security

1 While holdingSHIFT « button,the press thedisabled.

REC/PLAY SPEED l button.

œ The

security lock cannot be engaged w

 

ø ö appears on the digital display.

displayed.

To cancel the security lock, while holding the SHIFT

œ The

security lock will be cancelled b

« button, REC/PLAYpressSPEEDthel button, ALL RESET button. ö ” will be erased from the digital display.

English

37