Sanyo SRT-4040, SRT-4040DC SETTING THE CASSETTE EJECT MODE, Cassette Eject Setup, Connection, NOTE:, EJECT, ENTER, ENTER, NOTE:, NOTES:, button, button, ENTER button, ENTER button

NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002

SETTING THE CASSETTE EJECT MODE

Cassette Eject Setup Connection

When using two or more VCRs, the cassette tapes of all the VCRs or some of the VCRs can be ejected at the same time.

NOTE:

œ“TERMINAL SET” in the (OTHERS) menu should always be set to “SET2”.

1PressMENUthebutton to display the MAIN MENU.

2 Pressl the(orj) button to“4.WARNINGselect

OUT/CONTR. SET” line, then press the ENTER button.

øThe (WARNING OUT/CONTROL SET) menu appears.

VCR No. 1	VCR No. 2
SERIES IN COM TIMER OUT	SERIES IN COM TIMER OUT
	To SERIES IN terminal
	To COM terminal

Eject input (SERIES IN) terminal

œDepending“EJECTon MODE”the setting in the the(WARNING OUT/CONTROL SET) menu (see

“Cassette Eject Setup”), the cassette loaded into the VCR can be ejected when there is input to this terminal.

Eject output (TIMER OUT) terminal

	<WARNING@OUT@SET>SET@UP	œ A signal is output fromEJECTthis terminal
	ALARM@@@@@@@@@@@@Y
	NON@REC@@@@@@@@@@N	button is pressed (if the VCR is set up as the
	MECHA.PROBLEM@@@@Y
		“MASTER” VCR; see step 6 under“Cassette Eject
	<CONTROL@SET>	Setup”) or when there is input (a trigger) at the
	EJECT@MODE@@@@@@@EJECT1	SERIES IN terminal, even if the security lock is set or
	OPERATION@@@@@@@@SLAVE
		a cassette is not loaded.
3 Pressl	the(orj) button“EJECTuntilMODE”the	NOTES:
setting is highlighted, then press the ENTER button.
		œ The	names and signals are dif
4 Pressl the(orj) button to select the desiterminaled
		usual setting.
cassette eject mode,ENTERthenbutton. press the
EJECT1 . . . . The cassette is ejected only if the		œ Names in brackets apply to terminals o
	VCR is not in recording or	panel.
	recording pause mode.
EJECT2 . . . . The cassette is ejected only if the
	VCR is in stop mode.
5 Pressl	the(orj) button“OPERATION”until the
setting is highlighted, then press the ENTER button.

6 Pressl the(orj) button to select the desired operation, thenENTERpressbutton. the

SLAVE . . . . . The function is restricted to only the VCR being operated.

MASTER . . . The function is applied to the VCR being operated and all VCRs that are connected after it.

7 PressMENUtheEXIT button.

NOTE:

œTheEJECT button will not be operative during recording mode.

English 39