NB4QR/NA
PROGRAM TIMER RECORDING
Setting the HolidaysChanging a Program Timer Recording
By setting the holidays, timer recording will be conducted1 Follow1 stepsand2under“PROGRAM TIMER
on those days, as set for Sundays. | RECORDING” on page 28. |
1 PressMENUthebutton to display the MAIN MENU. 2 Pressl the(orj) button until the setting (l
changed is highlighted,ENTER then press the 2 Pressl the(orj) button to“8.HOLIDAYselect the
button.
øThe (HOLIDAY SET) menu appears.
3PressENTERthebutton, until the setting to correct is flashing.
<HOLIDAY@SET>
4 Pressl the(orj) button, to correct the sett
5PressMENUtheEXIT button, then press theTIMER button.
To Cancel a Program Timer Recording
3 Pressl the(orj) button to select the desired line, |
|
| ||
| ||||
then pressENTERthebutton. | 1 Follow1 stepsand2under“PROGRAM TIMER |
|
| |
RECORDING” on page 28. |
|
| ||
|
|
| ||
4 Pressl the(orj) button to set month of the |
|
| ||
holiday, thenENTERpressbutton. the | 2 Pressl the(orj) button until the setting (l | |||
canceled is highlighted,ENTER then press th | ||||
| ||||
5 Pressl the(orj) button to set day ofbuttonthe. holiday, | ||||
then pressENTERthebutton. | 3 PressENTERthebutton repeatedly, until“Y” is | |||
| ||||
ø Repeat steps 3 to 5 to set up to 20 holidays. | flashing. | |||
6 PressMENUtheEXIT button. | 4 Pressl the(orj) button,“N”to. select | |||
| 5 PressMENUtheEXIT button, then press theTIMER | |||
NOTES: | button. |
|
œ If setting holidays, be sure that a timer recording is set
for Sunday. If not, this function will not operate. If the
To cancel all program timer recordings
setting for Sundays extends over Sunday and another day, or if the timer recording1 Followperiod1 stepsandexte2 und“PROGRAMserbeforeTIMER
and after a Sunday, timer recordingRECORDING”willon pageonly28. be
carried out within the Sunday setting time (until 2 PressMENUtheRESET button.
midnight).
øAll programmed timer recordings are erased.
œIf a timer recording for Sundays is entered, the
3PressMENUtheEXIT button.
holidays timer recording will not function if the
program timer recording“N”. mode is set to
œTo erase a setting, follow the same procedure as above, but4
setting.
30 | English |