The REPEAT indicator lights.
ø
4 Pressl the(orj) button “REPEAT1”to setor “REPEAT2” (Refer to “Setting the Mode at the End of the Tape.” on page 23), then press the ENTER button.
5 PressMENUtheEXIT button.
6 PressREC/PLAYthe SPEED l button to set the recording speed mode.
7 PressRECthebutton.
ø Recording starts. When the tape end is reached, the VCR will rewind it to the beginning, and recording will resume.
ø When the end of the tape is reached, “OFF” will be displayed and TAPE END OUT terminal output will 0 V, until the rewinding operation starts.
<GENERAL@SET>
TAPE@IN@MODE@@@@@STOP
TAPE@END@MODE@@@@REW
CLOCK@ADJUST@@@@@01:00
THREAD@CHECK@@@@@N
VIDEO@LOSS@@@@@@@N
CLOG@DETECT.@@@@@N
REMOTE@@@@@@@@@@@MENU
VIDEO@@@@@@@@@@@@COLOR
VERTICAL@SYNC@@@@Y TAPE@@@@@@@@@@@@@T-160
3 Pressl the(orj) button“TAPEuntilEND the MODE” setting is highlighted, then press the ENTER button.
to
SET” line, then press the ENTER button.

NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002

AUTOREPEAT RECORDING

Autorepeat Recording

The same tape can be recorded over many times.œFollowBeforethestarting steps, under“NORMAL RECORDING”.

NOTES:

œIf there is an alarm trigger during a recording,“AL” and “A” flash on the digital display and

alarm recording starts. (Refer to “ALARM RECORDING” on page 25.)

1PressMENUthebutton to display the MAIN MENU. œ If “TAPEtheEND MODE” setting is “REPEAT1”, the

2 Pressl the(orj) button to“3.GENERALselect theREPEAT indicator will go off if there is an alarm trigger. After alarm recording, the recording will

øcontinue to the end of the tape then it will be rewound The (GENERAL SET) menu appears.

to the beginning and stop. “OFF” will be displayed on the digital display.

To turn off the “OFF” display, press the STOP,

EJECT, FF, REW or PLAY button.

œ If“AL” appears on the digital display and the “TAPE END MODE” setting is “REPEAT1”, autorepeat recording is not possible.

24

English