NB4QR/NA
CLOCK ADJUSTMENT
The time for the second and subsequent VCRs can be set to the same time as the first VCR.
A signal from a separate device can also be used to set the time for the second and subsequent VCRs to the same time as the first VCR. When using the signal from a separate device to set the time, input a 0 V signal to the CONTROL IN terminal of the first VCR for 100 ms or longer.
1PressMENUthebutton to display the MAIN MENU.
2 Pressl the(orj) button to“3.GENERALselect
SET” line, then press the ENTER button.
3 Pressl the(orj) button“CLOCKuntil the ADJUST” setting is highlighted, then press the
ENTER button.
Example
<GENERAL@SET>
TAPE@IN@MODE@@@@@STOP
TAPE@END@MODE@@@@REW
CLOCK@ADJUST@@@@@03:00
THREAD@CHECK@@@@@N
VIDEO@LOSS@@@@@@@N
CLOG@DETECT.@@@@@N
REMOTE@@@@@@@@@@@MENU
VIDEO@@@@@@@@@@@@COLOR
VERTICAL@SYNC@@@@Y
5PressMENUtheEXIT button.
The setting procedure on the first VCR is now thecompleted.6 Repeat the procedure for all the
“CLOCK ADJUST” (to the same time as set on the first VCR).
4 Pressl the(orj) button to set theNOTE:hour at which
the adjustment will be conducted, then press the | |
ENTER button. | œ This function will not operate on the |
saving/standard time is changed. |
NOTE:
Connection |
|
|
|
|
| |||
œ The clock adjustment“00:00”cannot. | be set to | |||||||
VCR No. 1 | VCR No. 2 | |||||||
| CONTROL IN COM CONTROL OUT | CONTROL IN COM CONTROL OUT | ||||||
|
|
|
|
|
|
|
| To CONTROL IN terminal |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| To COM terminal |
|
|
|
|
|
|
|
|
SELECTING INPUT AND OUTPUT TERMINALS
The input and output terminal signals can be selected so | SET2 . . . . . . . . . . . . . . | CONTROL IN is set to | |
that the VCR can be connected to older models of VCR. |
| CLOCK IN, SERIES IN is | |
1 PressMENUthebutton to display the MAIN MENU. |
| set toEJECT IN, | |
| CONTROL OUT is set to | ||
2 Pressl the(orj) button to“9. OTHERS”select | the | ||
CLOCK OUT and TIMER | |||
line, then press the ENTER button. |
| OUT is set toEJECT | |
ø The (OTHERS) menu appears. |
| OUT. (Select when | |
<OTHERS> |
| connecting to an older | |
| model.) | ||
*ALARM@LOG |
|
*POWER@FAILURE/DEW | 5 When finished,MENU EXITpressbutton. |
|
*TERMINAL@SET@@@@SET1 | the | |
| ||
| NOTE: |
|
3 Pressl the(orj) button“TERMINALuntil SET”the setting is highlighted, then press the ENTER button.
œ If set“SET2”,tothe “SERIES REC” line will not appear in the (ALARM/SERIES REC SET) menu.
4 Pressl the(orj) button to select the desired mode, then ENTERpressbuttonthe.
SET1 . . . . . . . . . . . . . . According to indication on back panel. (Select when not connecting to an older model.)
38 | English |