Sanyo SRT-4040, SRT-4040DC NORMAL RECORDING, Normal Recording, SET) menu), SET) menu), Before starting, “TAPE” is set to “T-120”in the (GENERAL

NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002

NORMAL RECORDING

Normal Recording				[Recording Speed Mode]
	Before starting			(When “TAPE”the is set to “T-160” in the (GENERAL
				SET) menu)
œ Turn the power on to all			devices		used.
			its erasure-			prevention		tab
œ Load a cassette tape with
				Recording	Maximum	Recording	Audio
	intact.			speed mode	recording	interval		Tape motion
					duration		recording
				(hour mode)		(second)
œ Set ONtheSCREENswitch“ON”topositionthe.					(hours)
			8		8	1/60
	NOTES:						Possible	Continuous
				24	24	3/60
	œ If“TAPE IN MODE” is set to “REC” in the			40	40	5/60
			000		Single image recording		Not possible	Intermittent
	(GENERAL SET) menu, recording will start.
				(When the	“TAPE” is set to “T-120” in the (GENERAL
	œ Set “TAPE”the item in the (GENERAL SET)
	menu according to the duration of the tape used.			SET) menu)
1 PressREC/PLAYthe		lSPEEDbutton to	setRecordingthe		Maximumrecording	Recording	Audio	Tape motion
	recording speed mode.			speed mode	duration	interval	recording
				(hour mode)		(second)
	ø The recording speed mode appears on-screen				(hours)
				6	6	1/60
	and on the digital display.			18	18	3/60	Possible	Continuous
2 PressRECthebutton.				30	30	5/60
				000	Single image recording		Not possible	Intermittent

øThe record indicator “a” lights.

øRecording starts.

øIf the tape end is reached while recording,

“OFF” is displayed on the digital display and the unit goes into the mode set at the “TAPE END MODE” setting in the (GENERAL SET) menu. To cancel the “OFF” display, press the STOP, EJECT, FF, REW or PLAY button.

øWhen the end of the tape is reached, the TAPE END OUT terminal output will be 0V. To cancel the output, press the STOP button.

NOTE:

œThe tape speed display will vary accor

“TAPE” item in the (GENERAL SET) menu setting. In this manual, all the examples and displays used are for when the “TAPE” item is set to “T-160”. If set to “T-120”, please refer to the table above for the corresponding durations and displays.

For example, if the recording speed mode is “8”, then the corresponding recording speed when set to “T-120” will be “6”, and, the counter reading of 8:00:00 will be 6:00:00 when set to “T-120”.

3 To stop recording,STOPbuttonpress. the

NOTES:

œA tape recording made on this VCR may not play

back with the same degree of clarity on a real time video cassette recorder from another manufacturer.

œIf you pressRECbuttonthe and the loaded cassette

has no erasure-prevention tab, the VCR will eject the cassette.

20 English