Sanyo VPC-S60 instruction manual Connecting To A Tv, Playback, Switch input to VIDEO, English

CONNECTING TO A TV

Connect the supplied AV interface cable from the PC/AV terminal on the digital camera to the AUDIO and VIDEO input terminals on the TV.

Open

To the VIDEO input terminal

Yellow plug

White plug

To the AUDIO input terminal

Switch input to VIDEO

PC	PC/AV terminal
/AV

To the PC/AV terminal

Supplied dedicated

AV interface cable

Playback

i After connecting the digital camera to the television, set the TV input switch to VIDEO input.

i When an AV interface cable is connected, no image appears on the camera’s monitor.

i The playback method is the same as when viewing images on the camera’s monitor.

i The same playback procedure as when playing back with the camera is used to play back voice memos and audio recordings as well.

Voice memo playback: see page 33

Audio playback: see page 60

CAUTION

Insert and pull out the cable carefully

i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket.

i Do not use excessive force when connecting and disconnecting cables.

English 102