Sanyo VPC-S60 F2.8, 1/30, Gently press the shutter button, What is the camera focusing on?, Hint

F2.8

1/15

3 Gently press the shutter button.

hPress the shutter button gently, taking care not to move the camera.

h The image that was captured appears on the monitor as long as the shutter button is kept pressed (post view).

4 Release your finger from the shutter button.

hThe captured image is recorded.

HINT	Focus indicator
What is the camera focusing on?	Target mark
i A target mark & on the monitor shows
the area the camera is focusing on.
i The camera automatically determines the
correct focus by measuring from 9
different focus points within the shooting
area. If the target mark is at a position
that is different from the point you wish to
focus on, you can refocus, for example,	F2.8
by changing the shooting angle.	1/30
i The large target mark appears when
the camera focuses on a wide area in	Shutter speed
the center of the screen.	Aperture
About the focus indicator	Motion alert icon
i A green focus indicator appears when
the subject is successfully focused, or a
red focus indicator when the camera
was not able to focus the subject.
The shutter speed and aperture are displayed

i When the camera focuses and the target mark appears, at the same time, the shutter speed and aperture settings are also displayed. You can use them as a reference when shooting.

If the motion alert icon appears...

i During still image shooting, if the shutter speed is slow and the possibility that the image may be blurred due to camera shake becomes high, the motion alert icon may appear on the monitor. In this case, use a tripod to stabilize the camera when shooting, or set the flash operation mode to automatic (page 48).

i When shooting with the scene function set to the fireworks ^ mode, the motion alert icon always appears, but this is normal.

English 32