When Printer Value is selected | Sanyo VPC-S60 instruction

3 Adjust the printer settings.

1Use the arrow buttons to select a printer setting parameter, and press the SET button.

h The screen to set the selected parameter appears.

2Press the [n] or [o] button to adjust the setting, and press the SET button.

h The selected parameter is set, and you are returned to the Printer Settings Menu.

h Follow the same procedure to adjust the other parameters, as desired.

hThe contents of the settings that can be made for each parameter will differ depending on the printer.

<When “PRINTER VALUE” is selected>

hThe images will be printed according to the settings specified on the printer side.

4 Select “EXIT”, and press the SET button.

hYou are returned to the Printing Mode Screen.

HINT

i The parameters that are displayed on the Printer Settings Menu will differ depending on the printer that is connected.

i To use printer functions which do not appear on your camera’s Printer Settings Menu, select “PRINTER VALUE”.

i If a function set by the camera is not available in the printer, the camera’s printer settings will automatically change to “PRINTER VALUE”.

English 110

Image 116

Sanyo VPC-S60 instruction manual When Printer Value is selected, Select EXIT, and press the SET button

Contents

VPC-S60EX VPC-S60 Important note KFOR American Users Declaration of Conformity KSymbols used in this manual KFOR Canadian UsersKFOR EU Users Points that require special attention Install the battery Open the battery/card cover, and insert the batteriesGetting UP and Running Press the ON/OFF button to turn the camera on Shooting mode Shooting KSingle shot still image photographyKVideo clip recording Press the m button KVideo clip playback When you are finished taking picturesPlayback KStill image playback Quick Search by Operation Basic operation Convenient Additional functions Shoot in dark conditionsIncrease the camera’s sensitivity Photographing people Adjust the monitor brightness Search for image Check the focusData Status Magnify an image Change the angle Contents Contents „ Other Devices and Connections Checking the Included Accessories What card means in this manual Getting the Most OUT of Your Camera Speedy mode-switching Abundant scene functions System MAP Parts Names Front Bottom Parts NamesRear Insert the batteries Installing the Batteries and CardOpen the battery/card cover Installing the Batteries and Card When removing the cardClose the battery/card cover Insert the card Be careful when removing the card Shooting without a card installedAbout the internal backup battery Manganese batteries cannot be used Turning on the camera Shooting mode Playback modeTurning the Camera on and OFF Turning off the camera About the auto power off function If the K icon appears Date and Time Setting Press the o button to select Tab Set the date and time Date and Time Setting To correct the date and time settings How to hold the camera Before Taking Pictures Before Taking Pictures About the touch sensor touch focus Using the autofocus Conditions that may cause incorrect focus When both near and far objects are present Fast-moving subjects Switching between the shooting mode and playback mode To turn the camera on in the playback mode How to switch the shooting mode Switching the display mode Settings display mode Normal display mode Adjust the monitor brightness Press the n and o buttons to adjust the brightness Where is the image data saved? Switching the guidance display ON/OFFHints for taking pictures Muting the camera sounds Still Image Shooting Screen Shooting single shotsIf the touch sensor is set to OFF What is the camera focusing on? About the focus indicatorGently press the shutter button Release your finger from the shutter button When you are finished viewing images Capturing and Playing Back Still ImagesViewing still images View other images Press W P on the zoom switch Image display playbackPress the playback button Select the image to play Back Magnifying zooming in the image Press Shutter to Save Hint Decreases with each press On the zoom switch Zoom jump playback Erasing files Delete the files To delete all the files To delete one file About protected images Set the camera to the sequential shots mode Limitations of sequential shots settingsShooting Sequential Shots Press the shutter button to start shooting Recording a video clip End the recording Video Clip Recording and Playback Playing back the video clip If no audio is heard When you are finished viewing video clipsOutline of playback operation Data for a video clip is very large Using the Scene Function Example In the single Shot mode Using the Scene Function Capture a still image with a voice memo Using the Zoom Can’t access the digital zoom?Can’t access the optical zoom? Take the picture Flash Setting No flash indication Flash Setting Automatic flash mode SELF-TIMER When xis selected SELF-TIMERTo pause or cancel the self-timer function Focus Range How to use the manual focus About zoom movement when using the manual focusFocus Range Set the focus range to manual Press the SET button Accessing the Recording Menu Set the camera to a shooting mode Press the Menu button Accessing the Recording Menu Overview of the Recording Menu Video clip recording mode Focus mode menuTouch sensor menu ISO sensitivity menu Touch Sensor Touch Focus Setting Select the desired icon, and press the SET button Display the Recording Menu RESOLUTION/VIDEO Clip SettingSingle shot/sequential shots shooting mode RESOLUTION/VIDEO Clip Setting Record and play back an audio file 100-0013 2006.12.24 Play back the recording Focus Area Setting ISO Sensitivity White Balance Display the Recording Menu Select White Balance To cancel the white balance setting Exposure Correction Displaying the Playback Menu Displaying the Playback Menu Overview of the Playback Menu Image Protect Select YES and press the SET button To select a different image in steps 2 To cancel the protect mode for an imageImage Protect Rotate Image Why can’t the image be resized? Changing Image Size ResizePlayback Menu Select Resize and press the SET Button Select the new image size Copy Data If no card is set in the camera, you cannot copy data Copy Data Select the desired type of copy When selecting Copy SingleWhen selecting Copy ALL Print Settings Display the screen to set the print settings About the finished prints Print SettingsAbout the Dpof format Specifying date imprinting and number of prints Specifying the number of prints Specifying dated prints Select EXIT, and press the SET button Clearing all the print settings Select YES, and press the SET button Slideshow Playback Select Slideshow and pressChanging the transition speed or transition effect Select START, and press the SET button Display the desired image Press and hold the Menu Button for at leastSecond 713KB Still image playback Displaying the Option Menu To exit the Option Menu Displaying the Option Menu Overview of the Option Menu Date and time setting LCD brightness page 29 h Adjust the brightnessTV system setting page 89 h Select the type of TV signal Auto power off Sounds KEY SW If Operation VOL or Play Volume is selected If Shutter or KEY SW is selected POST-VIEW Setting Select the desired setting, and press the SET button Screen Language Select the desired language, and press the SET button TV System Setting If no image appears on the TV Auto Power OFF Function Select the desired option, and press the SET button Auto Power OFF FunctionExample When Recording is selected File number reset function on File name image number File number reset function OFF File name image number File No. Reset Function What about the internal memory? Select OFF, and press the SET button Internal memory format With card installedNo card installed To cancel reformatting Select the desired format option, and press the SET buttonSelect YES Press the SET button Reformatting erases the data Resetting the Camera Settings Date and time setting Language setting To check the remaining video clip recording time Video Clip Recording Screen Recording mode Checking the Remaining Internal Memory and Card MemoryFor audio data Set the camera to the audio Battery Battery remaining charge Checking the Remaining Battery Charge Playback Connecting to a TVSwitch input to Video Direct Printing Print preparations Select PictBridge, and press the SET button Print To select one image and print it displayed image Complete the printing setupDirect Printing Select PRINT, and press the SET button To cancel printingSpecify the number of prints Complete the printing setup Press the Menu button To print all the images all imagesPictBridge Menu appears Select Print ALL IMAGES, Select DPOF, and press the SET Date Stamp When Printer Value is selected Question Answer Action PowerCommonly Asked Questions Appropriate for Commonly Asked Questions Playback work? Work for an image That was created Misc System Camera TroubleshootingProblem Cause Action Shooting Troubleshooting Correct Image About the scene function and focus range settings During still image shooting Specifications Camera Recording resolution 680 × 2,760 pixels single-shot still Specifications 20 to 60C -4 to 140F storage Camera connectors Battery life Images Sequential Others Hints for Taking Pictures How the autofocus worksReasons for unfocused images Preventing blurred images Advantage of using the manual focus Using the manual focus effectivelyHints for Taking Pictures Photographing a moving subject Photographing moving subjects sports mode Y Points Night photography night view mode Photographing scenery landscape mode \Page Be aware of your surroundings when using the camera Do not use where there is risk of explosionDo not use during a storm Keep the devices out of the reach of children Concerning the power cord Do not damage the power cordDo not get the docking station or AC adaptor/charger wet Other cautions Do not throw the battery in the fire or subject it to heat Do not drop, hit, or submit the battery to strong shocksUse the battery pack only in the specified device Insert the battery correctly, as indicated Humidity 10% to 90% no condensation Storage temperature -10 to 30C 14 to 86FWhen not using the camera for a long period Sanyo Software Pack 8.5 For Digital Camera English Copyrights For maximum enjoyment of your camera About this manual Symbols used in this manualIntroduction Application software SoftwareDriver software CD-ROM directory map Macintosh Operating EnvironmentWindows Before Mounting Your Camera Operating environment Windows Data file formats Type of data Data format File name structure Configuration of directories in the card About video clip data recorded with this camera Setting to the card reader mode For Windows XP users Mounting your camera Dismounting the camera Click on the OK button For Windows Me/Windows 2000 users Mounting your cameraLeft-click on Unplug or Eject Hardware in the task tray For Windows 98/98SE users Mounting your camera Specify the folder that has the USB driver Install the Sanyo Digital Camera Controller Confirm that the camera can be mounted Select Remove from the menu For MAC OS 9.xx users Mounting your camera For MAC OS X users Motion Director QuickTimePhoto Explorer Click on Exit About Kodak online service About the Carbon Lib folder Macintosh Photo Explorer installationInstall the Photo Explorer HOW to USE Photo Explorer Set up the environment Turn on the Create subfolder checkbox Set the camera to the card reader mode Run Photo Explorer When copying is completed, click on the OK buttonCopying image data to a computer Click on the Start button Photo Explorer features Importing Output format and playback