Sanyo VPC-S60 Setting to the card reader mode, Select “CARD READER”, and press the SET button

Setting to the card reader mode

1Start your computer, use the supplied USB interface cable to connect your camera to the computer, and turn the camera on. h Connect the camera’s PC/AV terminal to the computer’s USB

connector.

h The USB Connection Screen appears on the camera’s LCD monitor.

Open

To USB connector on the computer

PC/AV terminal

Supplied dedicated

USB interface cable

USB CONNECTION

CARD READER

PictBridge

CANCEL

PC /AV

To the

PC/AV

terminal

2Select “CARD READER”, and press the SET button.

CAUTION

Insert and pull out the cable carefully

i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket.

i Do not use excessive force when connecting and disconnecting cables. i Please connect the dedicated USB interface cable to your computer’s USB

connector. Do not connect it to the USB port on your monitor or keyboard, or to the USB hub. Be especially careful when installing the driver software. In some instances, it may not be possible to correctly install the driver software.

English 10