Sanyo VPC-S60 FILE No. RESET FUNCTION, File number reset function “ON”, File name image number

FILE No. RESET FUNCTION

If a newly formatted (page 95) card is used, the file name (image number) of the captured image automatically begins from 0001. If the card is subsequently reformatted, or if a different reformatted card is used, the file names again begin from 0001. This is because the file number reset function is set to “ON”, and consequently it results in more than one card containing images with the same numbers. By setting the file number reset function to “OFF”, even if the card is reformatted or the card is replaced with another card, the consecutive numbering of file names continues from the last number recorded by the camera.

<File number reset function “ON”>

	File name (image number)
Card A	0001, 0002 ......0012, 0013

Replace card

Card B

0001, 0002 0012, 0013

<File number reset function “OFF”>

	File name (image number)
Card A	0001, 0002 ......0012, 0013

Replace card

Card B

0014, 0015 0025, 0026

English 92