Sanyo VPC-S60 instruction manual Using the Zoom, Take the picture, Can’t access the digital zoom?

USING THE ZOOM

Your camera has two zoom functions: optical zoom and digital zoom.

1 Set the camera to the shooting mode (page 26), and point the camera lens at the subject.

2 Press the zoom switch to compose the desired image. [T]: Zoom in on the subject. [W]: Zoom out.

hWhen the zoom switch is pressed, the zoom bar appears

on the monitor.

hWhen the optical zoom factor is at maximum, zooming stops temporarily. When [T] on the zoom switch is pressed again, the mode changes to the digital zoom mode and zooming continues.

3 Take the picture.

Zoom switch

Monitor

Zoom bar

Pointer

When both optical and digital zoom are enabled

Optical zoom

Digital zoom (yellow)

When optical zoom only is enabled

HINT

Can’t access the digital zoom?

i When the resolution is set to k, the digital zoom is not available in the single-shot mode.

Can’t access the optical zoom?

i During video clip recording, only the digital zoom is available, and the optical zoom cannot be used.

47English