Sanyo VPC-S60 For Windows Me/Windows 2000 users Mounting your camera, Click on the OK button

For Windows Me/Windows 2000 users

Mounting your camera

1Set the camera to the card reader mode (page 10).

hIf a message appears on the computer monitor instructing you to load

the Windows CD-ROM, follow the instructions and install the driver.

hThe camera is recognized as a drive, and [Removable disk (E:)] appears in the [My Computer] window.

*The drive name (E:) may be different on your computer. h The card is recognized (mounted) as a disk.

h Double-click on the [Removable disk (E:)] icon in [My Computer], and you can process the contents of the card installed in your camera exactly like you would the data in the other computer drives.

Dismounting the camera

CAUTION

i To disconnect your camera, be sure to follow the procedure below. Failure to follow this procedure may cause faulty operation of your computer or loss of card data.

1Left-click on [Unplug or Eject Hardware] in the task tray.

hA list appears showing the devices connected to the computer’s USB

connector.

2Left-click on the camera drive (E:).

*The drive name (E:) may be different on your computer. h The [Safe to Remove Hardware] dialog box will open.

3Click on the [OK] button.

hYou can now disconnect the camera.

English 12