2. Processes and1.Specificationsfunctions

2-15 Compressor Current Detection Circuit

The Compressor Current Detection Circuit detects the compressor current and, depending on the current range, can stop the compressor motor so it will not be damaged by overcurrent.

Overcurrent can be caused by several factors, particularly mechanical seizing of the compressor or liquid backflow. Either of these conditions can hold the compressor to run, and thus drawing so much current that the motor can burn out.

Section

Comp. Amps.(A)

Is

+

1.4

Is

+

1.17

Is

Rated Current value

Locked Comp. Cut-off Range

Overload Protection Range

Normal Operation Range

1

 

 

 

0447_M_S

 

 

 

 

Fig. 18

 

 

 

 

 

Outdoor Model

Rated Current Value

Overload Protection

 

Locked Compressor Cut-off

ls (A)

ls x 1.17 (A)

 

Is x 1.4 (A)

 

 

 

 

 

 

 

CH2432

17.1

20.0

 

23.9

 

 

 

 

 

CH3632

27.5

32.0

 

38.5

 

 

 

 

 

Chart Summary and Explanations

Overload Protection

When the detected current is 1.17 – 1.4 times greater than the rated current value (Is) and continues for 30 seconds, both compressor and outdoor fan stop (Thermostat OFF).

After 3-minute pause, if the air conditioner is ready for Thermostat ON, it starts again. However, if the condition mentioned above repeats twice within 30 minutes, the remote controller displays the alarm message H01, compressor overload.

Locked Compressor Cut-off

When the detected current is 1.4 times greater than the rated current value (ls) and continues for 2 seconds, both compressor and outdoor fan stop (Thermostat OFF).

After 3-minute pause, if the air conditioner is ready for Thermostat ON, it starts again. However, if the condition mentioned above repeats twice, the remote controller displays the alarm message H02, compressor locked.

Failure of Compressor Current Detection

When the Compressor Current Detection Circuit fails to detect the compressor current within 2 seconds after compressor starts, both compressor and outdoor fan stop (Thermostat OFF).

After 3-minute pause, if the air conditioner is ready for Thermostat ON, it starts again. However, when the circuit fails to detect the current twice in a row, the remote controller displays alarm message H03,

Failure of compressor Current Detection.

2

3

4

SM830076

– 41 –

Page 41
Image 41
Sanyo XHS2432, XHS3632, CH2432, CH3632 service manual Compressor Current Detection Circuit, Overload Protection

XHS3632, XHS2432, CH3632, CH2432 specifications

The Sanyo CH3632 is a cutting-edge air conditioning unit that exemplifies efficiency and innovation in climate control technology. Designed primarily for residential use, this model has attracted attention due to its combination of powering performance and user-friendly features.

One of the standout characteristics of the Sanyo CH3632 is its energy efficiency. With a high Seasonal Energy Efficiency Ratio (SEER), the unit consistently delivers cooling while minimizing energy consumption. This not only reduces monthly electricity bills but also contributes positively to environmental sustainability. Its environmentally friendly refrigerant further emphasizes Sanyo's commitment to eco-conscious designs.

The unit employs advanced inverter technology, which allows for variable-speed compressor operation. This means that instead of turning on and off, the compressor adjusts its speed based on the cooling needs of the space. This creates a more stable and comfortable indoor environment while ensuring quieter operation. The reduced noise levels make the CH3632 an excellent choice for bedrooms and living spaces where peace and tranquility are essential.

Another key feature of the Sanyo CH3632 is its dual filtration system, which combines a pre-filter with a HEPA filter. This system effectively captures dust, allergens, and other airborne particulates, ensuring that the air quality remains high. Homeowners can breathe easier knowing that their indoor air is cleaner and healthier.

Smart features are also integral to this model. The Sanyo CH3632 can be integrated with smart home systems, allowing users to control temperature settings via mobile apps or voice commands. This connectivity makes it convenient to manage cooling preferences from anywhere in the house, adding a layer of modern convenience to home comfort.

Installation of the Sanyo CH3632 is straightforward and can often be completed without extensive modifications to existing structures. Its sleek design allows it to blend seamlessly into various home aesthetics, making it an attractive addition to any space.

In summary, the Sanyo CH3632 is a highly efficient air conditioning unit that incorporates advanced technologies for optimal performance. With eco-friendly features, smart connectivity, and an emphasis on air quality, it sets a high standard for comfort in residential air conditioning solutions.