4. Service procedures
1
2
3
4
Section
– 80 – SM830076
(G) Confirm and change the indoor unit address
The purpose of the above function is to let you confirm the indoor unit address after
the auto. address operation, and change the indoor unit address if it is needed.
aPress the TEST / CHK and ( ) buttons at the same time for more than 4 seconds.
bSelect the R.C. No. which you want to change with the UNIT (up) or FLAP (down)
buttons.
cPress the SET button (to confirm the R.C. No.).
The smallest registered indoor No. and the selected R.C. No. will be displayed.
Ex:
R.C. No. 3 is selected.
Indoor No. 2 is the smallest indoor No. of
the R.C. No. 3.
dSelect the indoor No. which you want to change with UNIT button. Once in this mode, the
fan motor of selected indoor unit will turn on and let you confirm the indoor unit
address.
0362_M_
I
SET CL
MODE
FAN SPEED
ON
OFF
SET TEMP.
UNIT
FLAP
AIR FLOW
R.C.
No.CODE
TIMER SET
SETTING
TEST / CHK
SETDATA
SET CL
MODE
FAN SPEED
ON
OFF
SET TEMP.
UNIT
FLAP
AIR FLOW
R.C. No.
SET
UNITNo.
No.CODE
TIMER SET
DATA
SETTING
TEST / CHK
0363_M_I