4. Service procedures

(11) Test Run

(11)-1. Preparing for Test Run

Before starting the air conditioner, check the followings:

(1)Remove all loose matter from the cabinet espe- cially metal filings, bits of wire, and clips.

(2)Connect the control wiring correctly and tighten all electrical connections.

(3)Remove the protective spacer for the compressor used for transportation.

(4)Connect the power to the unit for at least 5 hours before starting the compressor. The bottom of the compressor should be warm to the touch and the crankcase heater around the feet of the compressor should be hot to the touch. For Ceiling mounted and Recessed Type indoor units, the flap(s) move(s) for one minute when the power is connected to the unit.

This is not the malfunction.

(5)Open both the wide and narrow tube service valves after air purge.

(6)Remove the transportation cardboard protection for the indoor fan.

(11)-2. Performing Test Run

Be careful since the fan will

CAUTION start when performing Test Run.

For XHS models

(1)For XHS models, the Operation Selector is located above the electrical component box inside the indoor unit. To access the Operation Selector, press the two latches of the air intake grille in the direction of the arrow to open the grille. Open the air intake grille downward. (Fig. 11-1)

(2)Set the TEST RUN switch of the SERVICING switches on the Operation Selector (housed inside the indoor unit) to the ON position. (Fig. 11-1)

(3)Press the ON/OFF operation button on the remote control unit and start the air conditioner in Cooling or Heating mode.

(4)Let the unit run for about 30 minutes and check that the unit operates normally.

(5)After the test run, be sure to set the TEST RUN switch back to the OFF position to cancel the test run mode. Then stop the air conditioner.

All OFF for

 

 

 

 

 

initial settings.

 

 

 

 

 

ON

 

 

 

 

 

OFF

 

 

 

Operation

 

 

 

 

 

1 2 3 4

1. TEST RUN(ON)

 

 

ON • I

selector

1 2 3 4

ADDRESS

SWEEP

 

 

 

OFF•O

 

 

2. PCB CHK.(ON)

1 2 3

NORM. HOLD

 

 

1. TEST RUN

3. RCU MAIN(OFF)

 

 

 

 

/ SUB(ON)

 

 

 

 

2. (OFF)

4. OFF

 

 

 

 

 

 

 

 

 

3. (OFF)

 

 

 

 

 

4. (ON)

Section

1

Air filterAir intake grille

1584_M_I

Fig. 11-1

2

3

4

SM830076

– 99 –

Page 98 Page 100
Page 99
Image 99
Sanyo CH3632, XHS3632, XHS2432, CH2432 service manual Service procedures Test Run
Page 98 Page 100

XHS3632, XHS2432, CH3632, CH2432 specifications

The Sanyo CH3632 is a cutting-edge air conditioning unit that exemplifies efficiency and innovation in climate control technology. Designed primarily for residential use, this model has attracted attention due to its combination of powering performance and user-friendly features.

One of the standout characteristics of the Sanyo CH3632 is its energy efficiency. With a high Seasonal Energy Efficiency Ratio (SEER), the unit consistently delivers cooling while minimizing energy consumption. This not only reduces monthly electricity bills but also contributes positively to environmental sustainability. Its environmentally friendly refrigerant further emphasizes Sanyo's commitment to eco-conscious designs.

The unit employs advanced inverter technology, which allows for variable-speed compressor operation. This means that instead of turning on and off, the compressor adjusts its speed based on the cooling needs of the space. This creates a more stable and comfortable indoor environment while ensuring quieter operation. The reduced noise levels make the CH3632 an excellent choice for bedrooms and living spaces where peace and tranquility are essential.

Another key feature of the Sanyo CH3632 is its dual filtration system, which combines a pre-filter with a HEPA filter. This system effectively captures dust, allergens, and other airborne particulates, ensuring that the air quality remains high. Homeowners can breathe easier knowing that their indoor air is cleaner and healthier.

Smart features are also integral to this model. The Sanyo CH3632 can be integrated with smart home systems, allowing users to control temperature settings via mobile apps or voice commands. This connectivity makes it convenient to manage cooling preferences from anywhere in the house, adding a layer of modern convenience to home comfort.

Installation of the Sanyo CH3632 is straightforward and can often be completed without extensive modifications to existing structures. Its sleek design allows it to blend seamlessly into various home aesthetics, making it an attractive addition to any space.

In summary, the Sanyo CH3632 is a highly efficient air conditioning unit that incorporates advanced technologies for optimal performance. With eco-friendly features, smart connectivity, and an emphasis on air quality, it sets a high standard for comfort in residential air conditioning solutions.
Top Page Image Contents