Schneider Electric none manual Connecting a Single Network Cable, Connecting Dual Network Cables

5.3.1Connecting a Single Network Cable

On single-cable networks, connect the Modbus Plus cable to the BM85 Modbus Plus connector.

5.3.2Connecting Dual Network Cables

On dual-cable networks, connect Modbus Plus cables A and B to the correct connectors on the BM85 rear panel. Make sure to identify the correct cables and connectors.

5.3.3Connecting Dual-Cable Units on Single-Cable Networks

If you are installing a dual-cable unit on a network that has only a single cable, connect the cable to the rear panel CHANNEL A connector. Plug a Terminating Connector (Modicon part number AS-MBKT-185) into the CHANNEL B connector.

5.3.4Connecting Serial Port Cables

Connect the serial port device cables to the four connectors on the rear panel. Make sure to identify the correct device cables and connectors.

31007492 Installing the BM85 77