Sealife DC300/DC310 manual Format, Beep, Power off, Inactivity period Camera status

Format

This option formats the internal memory (or memory card ) and erases all stored images and data. To perform the format function, first

press the	button. Then select [Yes]	by
using the /	button and press OK.	A

progress bar displays, showing the progress of formatting.

Beep

The camera makes a sound (beep) each time you press the camera button if this function is enabled. Press the button. Select [On] or [Off] by using the / button and then press

OK.

Power off

If the camera goes unused for a certain period of time while the camera is powered on, the camera will switch to an idle mode, and even- tually turn itself off to conserve power.

Inactivity period	Inactivity period	Camera status
(batteries)	(AC power adapter)
60 seconds	60 seconds	stay idle
3 minutes	30 minutes	shut off

If the camera is idle, re-activate the camera by pressing any button or switch the mode dial. If the camera has powered-off you must turn the camera on again by pressing the button. The table (above) shows the default time settings for idle, and power-off. To change the power saving interval, first press the button.

Then select the power-off interval you prefer by using the / button and press OK.

[3 min], [5 min], [10 min], [30 min]

50