Sears 113.2945 owner manual Remove Adjusting Keys and Wrenches, Avoid Accidental Starting, Force

CRArT MR"/

SAFETY RULES FOR POWER TOOLS

I. KNOW YOUR POWER TOOL

Read the owner's manual carefully. Learn its applica- tion and limitations as well as the specific potential hazards peculiar to this tool.

2. GROUND ALL TOOLS

If tool is equipped with three-prong plug, it should be plugged into a three-hole receptacle. If adapter is used to accommodate two-prong receptacle, the adapter wire must be attached to a known ground. Never remove third prong.

I0. USE RIGHT TOOL

Don'tforce tool or attachment to do a job it was not designed for.

11.WEAR PROPER APPAREL

No loose clothing or jewelry to get caught in moving parts.

12. USE SAFETY GLASSES

Also use face or dust mask if cutting operation is dusty.

3.KEEP GUARDS IN PLACE and in working order.

4.REMOVE ADJUSTING KEYS AND WRENCHES

Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning on tool.

13.SECURE WORK

Use clamps or a vise to hold work when practical. It's

safer than using your hand, frees both hands to oper- ate tool.

14.DON'T OVERREACH

Keep your proper footing and balance at all times.

5.KEEP WORK AREA CLEAN

Cluttered areas and benches invite accidents.

6. AVOID DANGEROUS ENVIRONMENT

Don'tuse power tools in damp or wet locations. Keep work area well illuminated.

15.MAINTAIN TOOLS IN TOP CONDITION

Keep tools sharp and clean for best and safest per- formance. Follow instructions for lubricating and changing accessories.

7. KEEP CHILDREN AWAY

All visitors should be kept a safe distance from work area.

16. DISCONNECT TOOLS

before servicing and when changing accessories such as blades, bits, cutters.

8. MAKE WORKSHOP KID PROOF						AVOID	ACCIDENTAL	STARTING
--with	padlocks,		master	switches, or	17.
					by removing	Make sure switch is "OFF"		before plugging in cord.
starter	keys.
9. DON'T		FORCE	TOOL		18.	USE RECOMMENDED		ACCESSORIES
It will	do	the job	better	and be safer at	the rate for	Consult	the owner°s manual. Use of improper acces-
which	it was designed.					sories may be hazardous.

WEAR YOUR

The operation of any power tool can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before commencing power tool operation. We recommend Wide Vision Safety Mask for use over spectacles, or standard safety glasses.., available at Sears retail or catalog stores.

THIS SAFETY SEAL OF THE

POWER TOOL INSTITUTE ASSURES YOU...

1. That the manufacturer's power tools, including the particular tool associated with the Seal, are produced in accordance with applicable

Standards For Safety of Underwriters' Laboratories and American National Standards (ANSI).

2. That compliance with applicable safety standards is assured by in- dependent inspection and testing conducted by Underwriters" Labora-

		tories	(UL).
	3.	That	every motorized tool		is inspected		under	power.
	4.	That every tool has with			it adequate instructions and a				list of safety
		rules	for the	protection of the		user.
	5.	That the tool		manufacturer	is a	member	of the Power Tool Institute and
Copyright	1969 by Power Tool Institute, Inc. All rights reserved.	is a sponsor of the Institute's Consumer					Safety	Education	Program.