Sears 385. 17928 owner manual PresserFoot Types, Change the Presser Foot, Stitcing

•Change the Presser Foot (Continued)

To Snap On f

To Snap On the Presser Foot:

1.Place the presser foot so the hori- zontal pin on the foot lies just under the groove of the foot holder.

2.Lower the presser foot holder to lock the presser foot in place.

NOTE: If you do not hear the presser foot snap ill place, press down on the presser foot holder firmly until you hear the snap.

•PresserFoot Types

Zigzag Foot

A: Zigzag foot [

Use this foot for both straight and zigzag

stitcing.

Uses: Zigzag stitching (see page 3_6), Bar tacking (see page 3_88), Button sewing (see page 40), Overcast stitch (see page 41), Lace work (see page 4_33), Three-step zigzag (see page 44), Box stitching (see page 4_55),

Two-point shell stitching (see page 466),

Fagoting (see page 46),

Two-point box stitch (see page 4_7),

Overedging stitch (see page 4__]7),

Rick-rack stretch (see page 4__9_9),

Smocking (see page 50),

Elastic stretch (see page 5_11), Stretch patching (see page 52), Herring bone stretch (see page 5_22).

Straight Foot

%H: Straight foot

Use this foot exclusively for straight stitching

using center needle position only.

Uses: Straight stitching (see page 311),

Topstitching (see page 33),

Straigh t stretch (see page 49).

12