Insert the Bobbin into the Bobbin Holder | Sears 385. 17928 manual

•Insert the Bobbin into the Bobbin Holder

/

J

J

1. Put the

bobbin

into

the

bobbin

2.

Pull

about

4 inches

of

thread

3.

Then

pull

the

thread clockwise

4. Pull out about 1 5 cm (6") of thread

holder

so that

the

thread

feeds

toward

you

through

the

tension

toward

the back of the machine

and attach the hook cover plate.

counter-clockwise

(left).

slot _.

through

the

slot

(_) .

18

Image 20

Sears 385. 17928 owner manual Insert the Bobbin into the Bobbin Holder, So that Thread

Contents

Sewing Machine SEARS, Roebuck and CO Important Safety Instructions Table of Contents Page ArmCoverPlate Page Plug in the Machine and Switch on the Power Safety Feature Set the Pressure Dial Adjust the Presser Foot Lever Thread Cutter To Attach To remove Etc Check the PresserFoot Stitcing PresserFoot TypesChange the Presser Foot Presser Foot Types Sliding Buttonhole Foot Choose e Needle and Thread Check the Needle Fabric, Needle, Thread and Stitch Length Chart To Change the Needle Additional Spool Pin Firmly against the thread spoolTo Remove the Bobbin from the Machine Horizontal Spool Pin Ordinary Spool Bobbin Winding Insert the Bobbin into the Bobbin Holder So that Thread Prepare the Top Thread Thread the Needle Pick Up the Bobbin Thread Adjust the Top Thread Tension III For Zigzag Stitch Top tension Too Tight Too Loose Just Right Guide messagewindow Rickrack stretch Reverse III Zigzag 38Red 3N5 Refer to Herring Bone Stretch Buttonhole Twin Needle Stitches Satin Stitch Acceptable resu Its Darning Dropping the Feed DogsSet the Machine 213 Topstitching Sew in a Zipper On the zipper foot Openthezipper Wtu Chalk Basic Zigzag Stitch width control 1 to Set the MachineMonogramming Stitch Length Control Satin Stitch234 Bar Tacking Sew 4 to 6 zigzag stitches See EmbroideryFeed 0L\ Sew a Button Overcasting Stitch Zigzag foot For Blind Hemming Set the MachineControl 2 to 6Stitch length control red LaceWork Set the Machine Stitch width Control 2 to 213 Three-Step Zigzag Zigzag foot Box Stitching Shell Stitching Set the Machine Stitch width control 3 toControl 3 to Stitch length Two-point Shell Stitch Fagoting Stitch Useful to join elastic Two-point Box StitchOveredging Stitch Decorate with Geometric Patterns Satin stitchFoot Stretch Stitch Straight Stretch Zigzag foot Stitch and Its Uses Set the Machine Stitch width control 3 to Serging or Pine Leaf Stretch StitchingElastic Stretch Stitch Herring Bone Stretch Stretch Patching Set the Machine Length control Decorative Stretch PatternsTop thread tension #3t Vests, jackets or coats Built-in System 213-4Stitch Slider Stop sewing at the left stitch Set the stitch selector at USew 4 to 6 stitches Using Buttonhole Attachment Template 213504005 213505006 213506007 Sizes 15/16More Varied Will Optional Item Pins a Stitch length control 3 to Optional Item Optional ItemLeave 3 to 4 inches of thread Coarse stitches Illustration a Set the Machine For any of these stitch Stitch widthSatin stitch foot Problem Probable Cause Upper Problem Page Page Parts List 647814020 No Single Needles 647814031 No. !4 Single Needles647814042 Single Nuuou IruR 647814053 No Single Needles Storage box Additional Spool Pin Appliqueing Bar tacking Base plate Basic zigzag 3648 Zigzag Overcasting Zipper3435 Zipper Foot 13, 26,3435,6667 Warranty SEARS, Roebuck and CO., D/817 WA, Hoffman Estates, IL SEARS, Roebuck and CO., Chicago, IL60684 U.S.A 385