Sears 385. 17928 owner manual Built-in System, 213-4, Stitch, Slider

•Built-in System

Set the Machine

Stitch width control 3 to 5

1 213-4

.	!
I	I

Stitch length control

Blue zone _

Top thread	tension
control 2 to 6		Stretch Stitch	I
__3_		Sfading buttonhole foot	}
			J
Adjusting	the	Stitch Density

Depending upon your fabric or your

own preference in buttonholes, you

may alter the buttonhole stitch

density within the blue buttonhole range on the stitch length dial.

1. For less density, turn the dial toward "1".

2.For more density, turn the dial toward "0".

NOTE:	Always	make	a practice but-
	tonhole	on	a scrap	fabric
	you plan to use to find the
	more suitable		stretch	length.

i

1.a. Carefully mark the buttonhole length on your garment.

b.Change to the sliding buttonhole foot.

c.Insert the garment under the foot with, the b utto.........nhnl_ mark-

ing running toward you.

@

Coarse

stitches

for heavy fabrics

@

Fine

stitches

for light fabrics

Stretch Stitch

2. a,	Move	the	slider	(A) toward		you	3. a. Set		the stitch	selector at	_ .
	so that the		top	mark	(C) on	the	b.	Sew forward until you reach the
	slider	meets the start mark (B).
								front	marking	of your	button-
b. Line		up the		markings	on	the		hole.
	foot	with	the	top mark on your			c.	Stop sewing at the left stitch.

garment.

c.Lower the presser foot.

NOTE: The markings on the slider

are engraved in centimeters.

55