Satin stitch foot, Illustration a | Sears 385. 17928 specs

[	Set the Machine
[	for any of these stitch
I
		Stitch width				I
Top thread	tension	control			I''
control 3 to	7	(maximum)
			2_	3,_. 4
		Stitch	length		control	\
		brown	stretch		stitch	\
		positio_	or	grue, t zu_qe

A:Zigzag foot

F:Satin stitch foot

Twin needle

Illustration A

J

Turn off the power switch. (see page 6).

Insert the additional spool pin in the hole. (see page 1__6).

Place the felt and the spool on the additional spool pin. (see page 16__).

Prp.pare the too thread for additional spool pin. (see paqe 19).

Thread then is slipped into needle bar thread guide as illustration A. Chan_ the needle to twin needle° (see page !5__.)-

Thread needles from front to back.

NOTE: When changing the direction of sewing, turn the hand wheel so needles are in the up position.

When sewing with twin needle do not use a stitch width which goes past the twin needle mark ( _r ).

Twin needle is an optional item for all models.

61

Image 63

Sears 385. 17928 owner manual Set the Machine For any of these stitch Stitch width, Satin stitch foot, Illustration a

Contents

Sewing Machine SEARS, Roebuck and CO Important Safety Instructions Table of Contents Page ArmCoverPlate Page Safety Feature Plug in the Machine and Switch on the Power Set the Pressure Dial Thread Cutter Adjust the Presser Foot Lever To remove To Attach Etc Check the PresserFoot PresserFoot Types Change the Presser FootStitcing Sliding Buttonhole Foot Presser Foot Types Check the Needle Choose e Needle and Thread To Change the Needle Fabric, Needle, Thread and Stitch Length Chart Ordinary Spool Additional Spool PinFirmly against the thread spool To Remove the Bobbin from the Machine Horizontal Spool Pin Bobbin Winding So that Thread Insert the Bobbin into the Bobbin Holder Thread the Needle Prepare the Top Thread Pick Up the Bobbin Thread III Adjust the Top Thread Tension Top tension Too Tight Too Loose Just Right For Zigzag Stitch Guide messagewindow Rickrack stretch Reverse III Zigzag 3N5 38Red Herring Bone Stretch Refer to Buttonhole Twin Needle Stitches Satin Stitch Acceptable resu Its 213 DarningDropping the Feed Dogs Set the Machine Topstitching On the zipper foot Sew in a Zipper Openthezipper Basic Zigzag Stitch width control 1 to Set the Machine MonogrammingWtu Chalk Satin Stitch 234Stitch Length Control Sew 4 to 6 zigzag stitches Bar Tacking Embroidery FeedSee Sew a Button 0L\ Zigzag foot Overcasting Stitch Blind Hemming Set the Machine Control 2 to 6Stitch length control redFor LaceWork Set the Machine Stitch width Control 2 to 213 Zigzag foot Three-Step Zigzag Stitch length Box StitchingShell Stitching Set the Machine Stitch width control 3 to Control 3 to Fagoting Stitch Two-point Shell Stitch Two-point Box Stitch Overedging StitchUseful to join elastic Stretch Stitch Decorate with Geometric PatternsSatin stitch Foot Straight Stretch Zigzag foot Stitch and Its Uses Serging or Pine Leaf Stretch Stitching Elastic Stretch StitchSet the Machine Stitch width control 3 to Stretch Patching Set the Machine Herring Bone Stretch Decorative Stretch Patterns Top thread tensionLength control Vests, jackets or coats #3t Slider Built-in System213-4 Stitch Set the stitch selector at U Sew 4 to 6 stitchesStop sewing at the left stitch Will Using Buttonhole AttachmentTemplate 213504005 213505006 213506007 Sizes 15/16 More Varied Stitch length control 3 to Optional Item Pins a Optional Item Leave 3 to 4 inches of threadOptional Item Coarse stitches Set the Machine For any of these stitch Stitch width Satin stitch footIllustration a Upper Problem Probable Cause Problem Page Page Parts List Nuuou IruR 647814053 No Single Needles 647814020 No Single Needles647814031 No. !4 Single Needles 647814042 Single Base plate Basic zigzag Storage box Additional Spool Pin Appliqueing Bar tacking Zipper Foot 13, 26,3435,6667 3648Zigzag Overcasting Zipper 3435 SEARS, Roebuck and CO., D/817 WA, Hoffman Estates, IL Warranty 385 SEARS, Roebuck and CO., Chicago, IL60684 U.S.A