Sears 385. 17928 owner manual Check the PresserFoot

•Check the PresserFoot

The Presser feet are an important feature of this machine. You need to know what each foot does in order to use them effectively.

Your presser foot is held in place by a Foot Holder. Each presser foot merely snaps on the foot holder, which is seldom removed.

If you need to remove or attach the foot holder, here is what you do:

To Remove: To Attach:

" Presser bar _"_T't

•Change the Presser Foot

Use the correct presser foot for the stitch you wish to sew. Consult the Stitch Pattern Chart and the detailed directions for sewing with the various

presser feet.

To Snap Off:

f f

k__

Snap-on

butt on

_I _

Foot holder

screw

/

N. J

To Remove:

Turn the screw toward the back of

the machine. Use the large screw

driver.

"_,

To Attach:

1. Match the hole in the foot holder with the threaded hole in the presser bar.

2.Fit the foot holder screw into the hole.

3.Tighten the screw by turning it toward you.

To Snap Off the Presser Foot:

1.Raise the needle bar to its highest position by turning the hand wheel toward you.

2.Raise the presser foot.

3.Press the snap-on button on the back of the foot holder. The presser foot will drop off.

11