IMPORTANT SAFETY

INSTRUCTIONS

Your sewing machine is designed and constructed only for HOUSEHOLD use.

Read all instruction before using this sewing machine.

DA NG ER- ,o.uo0the risk of electric shock:

1.An appliance should never be left unattended when plugged in. Always

unplug this appliance from ,the electric outlet immediately after using and before cleaning.

2. Always unplug before relamping. Replace bulb with same type rated

15Watts.

3.Do not reach for the appliance that has fallen into water. Unplug immediately.

4.Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.

WAR N IN G- reduce the risk of burns, fire, electric shock,

or injury to persons.

1.Do not allow to be used as a toy. Close attention is necessary when this appliance is used by or near children.

2.Use this appliance only for its intended use as described in this manual.

Use only attachments recommended by the manufacturer as contained in this manual.

3.Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into

water. Return the appliance to the nearest authorized dealer or service

center for examination, repair, electrical or mechanical adjustment.

4.

Never operate

the

appliance

with

any

air opening

blocked.

Keep

 

ventilation

openings

of the

sewing

machine

and foot

controller

free from

 

accumulation

of

lint,

dust,

and

loose cloth.

 

 

 

5.Never drop or insert any object into any opening.

6.Do not use outdoors.

7.Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

8.To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.

9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10.Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

11.Always use the proper needle plate. The wrong plate can cause the needle to break.

12.Do not use bent needles.

13.Do not pull or push fabric while stitching.

It may deflect the needle causing it to break.

i4. Switch the sewing machine off ('0") when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like.

15. Always unplug the sewing machine from the electrical outlet when

removing covers, lubricating, or when making any other adjustments

mentioned in the instruction manual.

SAVE THESE INSTRUCTIONS

Page 3
Image 3
Sears 385. 17928 owner manual Important Safety Instructions