Optional Item, Leave 3 to 4 inches of thread | Sears 385. 17928

2. a.

b,

c.

(Optional Item)

guide plate

plate

!

Guide s!ot /

I Setting Mark

Guide block

/Gear

e plate

When you have selected the template with the size and style button- hole you need, slide the template into the guide plate.

Pull catch toward you while sliding the template until the button-

hole size you have thorn is at the setting mark.

Insert gear of base plate into slot of template and fit guide block into the center of the guide slot.

(Optional Item)

Top	!Buttonhole	foot
thread	/	Gear_lll	tl!_Sl°t
		Gear_lll	tl!_Sl°t

\

Starting point

Bobbin thread

J

3. a. Attach the buttonhole foot.

b.Adjust position of gear so it is aligned with the starting point of template.

The lever c_ be used to cha_-_je gear position.

C° Pull the bobbin thread up through guide slot by turning the hand wheel toward you while holding top thread.

d.Place the bobbin and top threads to the left side of guide plate.

Leave 3 to 4 inches of thread.

59

Image 61

Sears 385. 17928 owner manual Optional Item, Leave 3 to 4 inches of thread

Contents

Sewing Machine SEARS, Roebuck and CO Important Safety Instructions Table of Contents Page ArmCoverPlate Page Safety Feature Plug in the Machine and Switch on the Power Set the Pressure Dial Thread Cutter Adjust the Presser Foot Lever To remove To Attach Etc Check the PresserFoot Change the Presser Foot PresserFoot TypesStitcing Sliding Buttonhole Foot Presser Foot Types Check the Needle Choose e Needle and Thread To Change the Needle Fabric, Needle, Thread and Stitch Length Chart Firmly against the thread spool Additional Spool PinTo Remove the Bobbin from the Machine Horizontal Spool Pin Ordinary Spool Bobbin Winding So that Thread Insert the Bobbin into the Bobbin Holder Thread the Needle Prepare the Top Thread Pick Up the Bobbin Thread III Adjust the Top Thread Tension Top tension Too Tight Too Loose Just Right For Zigzag Stitch Guide messagewindow Rickrack stretch Reverse III Zigzag 3N5 38Red Herring Bone Stretch Refer to Buttonhole Twin Needle Stitches Satin Stitch Acceptable resu Its Dropping the Feed Dogs DarningSet the Machine 213 Topstitching On the zipper foot Sew in a Zipper Openthezipper Monogramming Basic Zigzag Stitch width control 1 to Set the MachineWtu Chalk 234 Satin StitchStitch Length Control Sew 4 to 6 zigzag stitches Bar Tacking Feed EmbroiderySee Sew a Button 0L\ Zigzag foot Overcasting Stitch Control 2 to 6Stitch length control red Blind Hemming Set the MachineFor LaceWork Set the Machine Stitch width Control 2 to 213 Zigzag foot Three-Step Zigzag Shell Stitching Set the Machine Stitch width control 3 to Box StitchingControl 3 to Stitch length Fagoting Stitch Two-point Shell Stitch Overedging Stitch Two-point Box StitchUseful to join elastic Satin stitch Decorate with Geometric PatternsFoot Stretch Stitch Straight Stretch Zigzag foot Stitch and Its Uses Elastic Stretch Stitch Serging or Pine Leaf Stretch StitchingSet the Machine Stitch width control 3 to Stretch Patching Set the Machine Herring Bone Stretch Top thread tension Decorative Stretch PatternsLength control Vests, jackets or coats #3t 213-4 Built-in SystemStitch Slider Sew 4 to 6 stitches Set the stitch selector at UStop sewing at the left stitch Template 213504005 213505006 213506007 Sizes 15/16 Using Buttonhole AttachmentMore Varied Will Stitch length control 3 to Optional Item Pins a Leave 3 to 4 inches of thread Optional ItemOptional Item Coarse stitches Satin stitch foot Set the Machine For any of these stitch Stitch widthIllustration a Upper Problem Probable Cause Problem Page Page Parts List 647814031 No. !4 Single Needles 647814020 No Single Needles647814042 Single Nuuou IruR 647814053 No Single Needles Base plate Basic zigzag Storage box Additional Spool Pin Appliqueing Bar tacking Zigzag Overcasting Zipper 36483435 Zipper Foot 13, 26,3435,6667 SEARS, Roebuck and CO., D/817 WA, Hoffman Estates, IL Warranty 385 SEARS, Roebuck and CO., Chicago, IL60684 U.S.A