Decorate with Geometric Patterns, Satin stitch | Sears 385. 17928

Decorate with Geometric Patterns

Set the Machine

Stitch width control 3 to 5

Top thread tension control 3 to 8

Stitch length control green

zone

2

F: Satin stitch

I

l

Here's How

1.	Adjust	the	stitch	width	and	length as
	you desire.
2.	Practice	the	stitch	on a scrap of		fabric.

foot

The Stitches and Their Uses

Stretch Stitch

3.	Mark	the	lines	for	decoration		on the
	fabric,	using a washable				fabric	marker.
4.	Lower	the	needle	at	the	starting	point.

These stitches are purely decorative.

You can sew one row or several or vary the stitch width and length for special effects.

Experiment on a scrap of fabric to see what special effects are possible.

5.	Lower	the presser foot.
6.	Gently	guide	the fabric	along	the
	maked	line.

48

Image 50

Sears 385. 17928 owner manual Decorate with Geometric Patterns, Satin stitch, Foot, Stretch Stitch

Contents

Sewing Machine SEARS, Roebuck and CO Important Safety Instructions Table of Contents Page ArmCoverPlate Page Plug in the Machine and Switch on the Power Safety Feature Set the Pressure Dial Adjust the Presser Foot Lever Thread Cutter To Attach To remove Etc Check the PresserFoot Stitcing PresserFoot TypesChange the Presser Foot Presser Foot Types Sliding Buttonhole Foot Choose e Needle and Thread Check the Needle Fabric, Needle, Thread and Stitch Length Chart To Change the Needle To Remove the Bobbin from the Machine Horizontal Spool Pin Additional Spool PinFirmly against the thread spool Ordinary Spool Bobbin Winding Insert the Bobbin into the Bobbin Holder So that Thread Prepare the Top Thread Thread the Needle Pick Up the Bobbin Thread Adjust the Top Thread Tension III For Zigzag Stitch Top tension Too Tight Too Loose Just Right Guide messagewindow Rickrack stretch Reverse III Zigzag 38Red 3N5 Refer to Herring Bone Stretch Buttonhole Twin Needle Stitches Satin Stitch Acceptable resu Its Set the Machine DarningDropping the Feed Dogs 213 Topstitching Sew in a Zipper On the zipper foot Openthezipper Wtu Chalk Basic Zigzag Stitch width control 1 to Set the MachineMonogramming Stitch Length Control Satin Stitch234 Bar Tacking Sew 4 to 6 zigzag stitches See EmbroideryFeed 0L\ Sew a Button Overcasting Stitch Zigzag foot For Blind Hemming Set the MachineControl 2 to 6Stitch length control red LaceWork Set the Machine Stitch width Control 2 to 213 Three-Step Zigzag Zigzag foot Control 3 to Box StitchingShell Stitching Set the Machine Stitch width control 3 to Stitch length Two-point Shell Stitch Fagoting Stitch Useful to join elastic Two-point Box StitchOveredging Stitch Foot Decorate with Geometric PatternsSatin stitch Stretch Stitch Straight Stretch Zigzag foot Stitch and Its Uses Set the Machine Stitch width control 3 to Serging or Pine Leaf Stretch StitchingElastic Stretch Stitch Herring Bone Stretch Stretch Patching Set the Machine Length control Decorative Stretch PatternsTop thread tension #3t Vests, jackets or coats Stitch Built-in System213-4 Slider Stop sewing at the left stitch Set the stitch selector at USew 4 to 6 stitches More Varied Using Buttonhole AttachmentTemplate 213504005 213505006 213506007 Sizes 15/16 Will Optional Item Pins a Stitch length control 3 to Optional Item Optional ItemLeave 3 to 4 inches of thread Coarse stitches Illustration a Set the Machine For any of these stitch Stitch widthSatin stitch foot Problem Probable Cause Upper Problem Page Page Parts List 647814042 Single 647814020 No Single Needles647814031 No. !4 Single Needles Nuuou IruR 647814053 No Single Needles Storage box Additional Spool Pin Appliqueing Bar tacking Base plate Basic zigzag 3435 3648Zigzag Overcasting Zipper Zipper Foot 13, 26,3435,6667 Warranty SEARS, Roebuck and CO., D/817 WA, Hoffman Estates, IL SEARS, Roebuck and CO., Chicago, IL60684 U.S.A 385