4
ASSEMBLING CHECK
The TEST MENU allows for each part of the cabinet to be checked, the Monitor to be adjusted, and the coin and
game related various functions to be performed.
| CPU ROM TEST |
| |
GOOD | (CROM03 MASK) | IC.1 | ***** |
GOOD | (CROM02 MASK) | IC.2 | ***** |
GOOD | (CROM01 MASK) | IC.3 | ***** |
GOOD | (CROM00 MASK) | IC.4 | ***** |
GOOD | (CROM13 MASK) | IC.5 | ***** |
GOOD | (CROM12 MASK) | IC.6 | ***** |
GOOD | (CROM11 MASK) | IC.7 | ***** |
GOOD | (CROM10 MASK) | IC.8 | ***** |
GOOD | (CROM33 EPROM) | IC.9 | ***** |
GOOD | (CROM32 EPROM) | IC.10 | ***** |
GOOD | (CROM31 EPROM) | IC.11 | ***** |
GOOD | (CROM30 EPROM) | IC.12 | ***** |
GOOD | (CROM3 EPROM) | IC.13 | ***** |
GOOD | (CROM2 EPROM) | IC.14 | ***** |
GOOD | (CROM1 EPROM) | IC.15 | ***** |
GOOD | (CROM0 EPROM) | IC.16 | ***** |
PRESS TEST BUTTON TO EXIT
| INPUT TEST |
HANDLEBAR | OFF |
THROTTLE | OFF |
FRONT BRAKE | OFF |
REAR BRAKE | OFF |
VIEW CHANGE | OFF |
MUSIC SELECT | OFF |
SHIFT UP | OFF |
SHIFT DOWN | OFF |
START | OFF |
COIN #1 | OFF |
OFF | |
OFF |
Selecting the MEMORY TEST on the test mode menu screen causes the
Selecting the INPUT TEST on the menu screen in the test mode to display the screen on which each SW and Volume is tested. Press each switch. (To check the Coin SW, insert a Coin from the inlet with the Coin Chute Door being opened.) If the display beside each switch is ON, the switch and wiring connection are satisfactory. Check the display of each Volume value. The Volume could have an irregularity caused by differences between machines and vibration during transporta- tion. Set the Volume values by referring to Section ?
PRESS TEST BUTTON TO EXIT
OUTPUT TEST
START | LAMP | OFF |
VIEW CHANGE | LAMP | OFF |
MUSIC SELECT | LAMP | OFF |
RACE READER | LAMP | OFF |
>EXIT
SELECT WITH SERVICE BUTTON
PRESS TEST BUTTON TO EXIT
In the output test mode, carry out lamp test to ascertain that each lamp lights up satisfactorily.
13
