Putting the headset system into operation

Connecting the base station to the mains power supply

The base station is ready for operation as soon as it is connected to the mains power supply.

￿ Connect the DC IN connector  of the power supply unit to the DC IN socket .

 

 





￿ Plug the power supply unit  into a wall socket.

The LINK LED  lights up red. The LED of the last used mode button

(PHONE ￿ or PC ) lights up white.

 

When using the headset system only in PC mode, the power from

 

the PC via the USB cable is sufficient to power the base station. For

 

charging the rechargeable battery within the specified charging



times (see page 22) and for use in Phone mode, the power supply

unit is required.

 

Connecting the base station to a fixed line phone

If your telephone features a headset socket for connecting the electronic call control, please use this socket.

To connect the base station to a fixed line phone, choose one of the follow options:

Possibility Connection

 

to a fixed line phone without headset socket

A

 

 

 

 

 

 

to a fixed line phone with headset socket

B

 

 

 

 

 

 

of an optional mechanical handset lifter

C

(with connection possibilities

A

and

B

only)

 

 

 

 

 

 

 

 

to an optional electronic hook switch control (EHS)

D

 

 

 

 

 

￿Choose your connection possibility and proceed as described under A , B , C or D on the following pages.

For additional information on the individual settings for the headset system via the DIP switch row , refer to page 20.

11