Using the headset system

The volumes can be adjusted in several steps. When the minimum or maximum volume is reached, you hear a double beep in the headset.

￿ To increase or reduce the volume step-by-step, push the AUDIO button  backwards or forwards.

The assignment of the AUDIO button can be swapped depending on whether you wear the headset on the right or left ear (see “Swapping the assignment of the AUDIO button ” on page 16).

6 Vol –

Vol +

MUTE Mic

6



Muting the headset’s microphone

To mute the headset’s microphone during a call (the LINK LED  on the base station lights up blue):

￿ Press the AUDIO button .

The microphone is muted. While the microphone is muted, you hear a beep in the headset every 5 seconds and the LINK LED  on the base station flashes red.

To unmute the headset’s microphone:

￿ Press the AUDIO button  again.

You hear a low confirmation beep in the headset.

or

￿Disconnect the wireless link between headset and base station (see

page 23).

In both cases, the muting is canceled and the LINK LED lights up blue again or goes off.

Using the advanced functions

Pairing additional headsets for shared use

You can use one DW series base station with different DW series* head- sets. This can be advantageous if you share a telephone workplace. The last headset paired to the base station can be used without more ado.

If no wireless link is established between headset and base station:

￿Place the additional headset into the magnetic holder of the base station.

During pairing of the headset to the base station, the HEADSET LED  flashes blue/red. If pairing was successful, the HEADSET LED  lights up blue. You can now use the newly paired headset.

*The DW series comprises the following products: DW Office, DW Office USB, DW Pro1/ Pro2, DW Pro1/Pro2 USB. The DW 800 is not part of the DW series.

30