Sennheiser DW Pro1/Pro2 manual 21

Putting the headset system into operation

Adjusting advanced settings

The DIP switch row  allows you to adjust the headset system to your individual needs. By default, all DIP switches are set to the upper position.

To change the settings of the DIP switch row :

￿If necessary, disconnect an existing wireless link between base station and headset (see page 23).



￿Use a pointed object (e.g. a pen) to set the DIP switches to the desired position.

Configuring the handset lifter/hook switch – DIP switch 1 and 2

Switch position	Function
	Manual operation
	Lifts/hangs up the handset manually or using
	the handset lifter.
	Electronic hook switch (DHSG standard)
	Call control via the DW Pro1/Pro2 headset system.
	Electronic hook switch (MSH standard)
	Call control via the DW Pro1/Pro2 headset system.
	Manual operation
	Lifts/hangs up the handset manually or using
	the handset lifter.

Adjusting the radio range – DIP switch 3

If many DECT systems are operated in a confined space, interference can occur. In this case, you should change the radio range.

Switch position	Function
	Standard radio range

Reduced radio range

Use this setting in order to avoid interference with other

DECT systems.

Range of approx. 10 m indoors

20