Putting the headset system into operation
Testing the headset system in PC mode and adjusting it
Testing the PC connection
When Phone mode is selected (the LED of the PHONE button 
lights up white):
Press the PC button 
on the base station.
The base station is set to PC mode and the LED of the PC button 
lights up white.
Press either the LINK button on the headset or the PC button 
on the base station.
A wireless link is established between the headset and the base station, the LINK LED lights up blue and the HEADSET LED flashes blue.
4
5
Use your softphone to make a call to someone who will help you adjust the correct microphone sensitivity for PC mode (see below).
The system is correctly connected if the other party can hear you at a comfortable level.
Adjusting the microphone sensitivity
Depending on the operating system used, adjust the microphone sensi- tivity so that the other party can hear you at a comfortable level (see the instruction manual of your operating system).
Some softphones provide automatic adjustment of the microphone sensitivity. If possible, activate this function in order to be able to use the headset microphone to the full.
19