Putting the headset system into operation

￿Push the AUDIO button  in the direction in which you want to increase the volume until the HEADSET LED  goes off.

The headset switches to standby mode.

5s

4

Right

5 6

Left

Testing the headset system in Phone mode and adjusting it

Testing the telephone connection

When PC mode is selected (the LED of the PC button lights up white):

￿Press the PHONE button ￿ on the base station.

The base station is set to Phone mode and the LED of the PHONE button ￿ lights up white.

￿Press either the LINK button  on the headset or the PHONE button

￿on the base station.

A wireless link is established between the headset and the base station, the LINK LED  lights up blue and the HEADSET LED  flashes blue.



4



5

￿Lift the handset (If a handset lifter is connected, it automatically lifts the handset).

The system is correctly connected if you can hear a clear dial tone and if the other party can hear you at a comfortable level.

If the audio signal/dial tone is disturbed, adjust the audio signal (see page 18). If the other party cannot hear you well, adjust the micro- phone sensitivity (see page 18).

17