Putting the headset system into operation

Putting the headset into operation

The microphone boom of the Pro1/Pro2 headset can be swiveled, allowing the microphone to be worn on the left or right-hand side (see page 24).

50%

20 min

100%

1 h

Before using the headset for the first time, charge the rechargeable battery for at least 20 minutes (see page 22).

Labeling the headset

The name plate  allows you to label the headset.

￿Change the lettering of the name plate as shown.

The “Nameplate-template.pdf” PDF file included on the CD ROM allows you to create and print individual name plates.

3

3

Swapping the assignment of the AUDIO button 

The assignment of the AUDIO button  can be swapped depending on whether you wear the headset on the right or left ear. By default, the headset is configured for wearing on the right ear. Pushing the AUDIO button  backwards increases the volume, pushing it forwards reduces the volume (see page 29).

To swap the assignment of the AUDIO button :

￿Simultaneously press and hold the headset’s LINK button  and AUDIO button  for 5 seconds.

The HEADSET LED  flashes blue/red.

16