Using the headset system



 

 

You can also establish or disconnect the wireless link by pressing

 



 

 

 

the PC button

 or the PHONE button

￿ on the base station

 

 

 

 

 

 

(depending on the selected mode (PC or Phone), see page 28).

 

 

 

If your telephone has a built-in electronic hook switch supporting

 

 

 

the MSH standard (see page 13), you can only disconnect the wire-

 

 



less link between headset and base station by placing the headset

 

 

into the base station. The control signals (“accept a call”, “end a

 

 

 

 

 

 

call”) of the headset are still transmitted to the electronic hook

 

 

 

switch without any restrictions.

 

Putting the headset on and adjusting it

￿Rotate the microphone boom as shown.

￿Carefully bend the flexible microphone boom so that the microphone  points towards your mouth.

Maintain a distance of about 0.8-1.2“ (2-3 cm) between the micro- phone and the corner of the mouth.

If you are using the Pro1 headset:

￿Put on the headset so that the ear pad rests comfortably on your left or right ear and that the headband  runs over the top of your head.

If you are using the Pro2 headset:

￿Put on the headset so that the ear pads  rest comfortably on your ears.

 

 

 

7

Left

Right

Pro1

Pro2

 

 

9

9 1

2-3 cm

24