Using the components
Switching the components on/off
ew 300 G2 transmitters and receivers can only be switched off when the standard display is shown on the display panel. Within the operating menu, the ON button (receiver) or the ON/OFF button (transmitters) serves as the ESC (cancel) key, i.e you cancel your entry and return to the standard display.
Note:
Remove the batteries or the accupack when the units will not be used for extended periods of time.
Switching the rack-mount receiver on/off
Press the ON button | to switch the receiver on. |
To switch the receiver off, press the ON button until “OFF” appears on the display.
Switching the bodypack transmitter on/off | |
Press the two unlocking buttons | and open the battery compartment |
cover . |
|
Press the ON/OFF button | to switch the bodypack transmitter on. The | |
red LED lights up. |
|
|
To switch the bodypack transmitter off, press the ON/OFF button | until | |
“OFF” appears on the display. The red LED goes off. |
| |
Close the battery compartment. The battery compartment cover | locks | |
into place with an audible click. |
| |
Switching the radiomicrophone on/off
Turn the protective cap at the bottom of the radiomicrophone so that the ON/OFF button becomes accessible.
Press the ON/OFF button to switch the radiomicrophone on. The red LED lights up.
To switch the radiomicrophone off, press the ON/OFF button | until |
“OFF” appears on the display. The red LED goes off. |
|
18
