Scan
Scan
Channel list
Scan new
Scan reset
Bank 1 2 3 4 Free 08 08 03 04
Bank 5 6 7 8 U Free 06 08 02 01 08
Channel |
|
1.01 | 786.300 MHz |
B.CH |
Scan
Channel list
Scan new
Scan reset
Bank 1 2 3 4 Free 08 08 03 04
Bank 5 6 7 8 U Free 06 08 02 01 08
Scanning the channel banks for free channels (EM 300 G2 only)
Before putting one or several transmission links into operation, you should scan the channel banks for free channels.
Displaying the last scan result
Select the “Scan” menu.
Select “Channel list” to display the last scan result. The number of free channels is displayed for all channel banks.
For further details, select a channel bank by using the / buttons and then press the SET button. This gets you into the “Channel” menu where you can select a channel of this channel bank or display the frequency of a channel.
Starting the scan
Before starting the scan, switch all transmitters of your system off, since channels used by
Select the “Scan” menu.
Select “Scan new” and confirm your selection by pressing the SET button. After the scan is completed, the number of free channels is displayed for all channel banks. Channels that are used or subject to interference are locked and cannot be selected.
For further details, select a channel bank by using the / buttons and then press the SET button. This gets you into the “Channel” menu where you can select a channel of this channel bank or display the frequency of a channel.
Scan
Channel list
Scan new
Scan reset
Bank 1 2 3 4 Free 08 08 08 08
Bank 5 6 7 8 U Free 08 08 08 08 08
Releasing locked channels
Select the “Scan” menu.
Select “Scan reset” and confirm your selection by pressing the SET button. The last scan result is deleted and all channels can now be selected again.
29
