Sennheiser EW 300 G2 manual Care and maintenance, For multi-channel operation

... for multi-channel operation

y For multi-channel operation, you can only use the channels in a channel bank. Each of the channel banks “1” to “8” accommodates eight factory- preset frequencies which are intermodulation-free. For alternative frequency combinations, please refer to the enclosed frequency table. The freely selectable frequencies can be selected via the “TUNE” menu and can be stored in the channel bank “U”.

y When using several transmitters simultaneously, interference can be avoided by maintaining a minimum distance of 20 cm between two transmitters.

yUse special accessories for multi-channel applications (see “Accessories“ on page 43).

Care and maintenance

Use a slightly damp cloth to clean the units from time to time.

Note:

Do not use any cleansing agents or solvents.

To clean the SKM 300 G2’s sound inlet basket, proceed as follows:

Unscrew the sound inlet basket (turn counterclockwise) and remove it.

Remove the foam insert.

Use a slightly damp cloth to clean the sound inlet basket from the inside and ouside.

Reinsert the foam insert.

Replace the sound inlet basket on the SKM 300 G2 and screw it tight (taking care not to loose the colored identification ring).

37