Diversity display
The EM 300 G2 receiver operates on the true diversity principle (see “Diversity reception“ on page 39).
The diversity display indicates whether diversity section I (i.e. antenna 1) or diversity section II (i.e. antenna 2) is active.
Button backlighting
In standby operation, the ON button is backlit in red. When the receiver is
switched on, the SET button | and the / button | are additionally |
backlit in green. |
|
|
Indications and displays on the transmitters
Operation and battery status indication
The red LED (LOW BAT/ON) provides information on the current operating state of the transmitter:
Red LED lit up: | The transmitter is switched on and the capacity of the |
| batteries/accupack BA 2015 is sufficient. |
Red LED flashing: The batteries are/the accupack BA 2015 is going flat (LOW BAT)!
In addition, the
3 segments: | capacity approx. 100 % |
2 segments: | capacity approx. 70 % |
1 segment: | capacity approx. 30 % |
Battery icon flashing: | LOW BAT |
“MUTE” display
The “MUTE” display appears on the display panel when the transmitter is muted (see “Muting the transmitters“ on page 19).
Modulation display
The level display for audio signal “AF” shows the modulation of the transmitter. When the transmitter’s audio input level is excessively high, the level display for audio signal “AF” shows full deflection.
10
