•The LED flashes red.
•Three beeps are heard in the headset every 30 seconds (3x).
•Less than five minutes of talk time are left.
Switching the headset on/off
f Open the microphone boom .
The headset is switched on. The | ||
LED indicates the current operat- | ||
| ||
ing mode: |
| |
• If the LED flashes slowly in |
| |
blue, the headset is already |
| |
paired to a mobile phone. The |
| |
headset is therefore ready to use. |
|
•If the LED flashes alternatingly
in red and blue, the headset is not yet paired to a mobile phone. Pair it as described under “Pairing the headset to mo- bile phones or other Bluetooth devices” on page 11.
•If the headset is already paired to a mobile phone and if there is an incoming call on your mobile phone, the call is answered immediately by opening the microphone boom without any further action.
To switch off the headset:
f Close the microphone boom .
The headset is switched off. The LED |
|
stops flashing. |
|
All settings are saved. The battery lasts |
|
longer, if you switch off the headset | |
when not telephoning with it. |
10
