22
Using the components

Switching the components on/off

The ew100 G2 transmitters and receivers can only be switched off when the
standard display is shown on the display panel. Within the operating menu,
the ON/OFF button or the POWER button (EM 100 G2 only) serves as th e ESC
(cancel) key, i.e you cancel your entry and return to the standard display.
Note:
Remove the batteries or the accupack when the units will not be used for
extended periods of time.
Switching the rack-mount receiver on/off
Press the POWER button to switch the receiver on.
To switch the receiver off, press the POWER button until “OFF” appears on
the display.
Switching the bodypack receiver/transmitter on/off
Press the two unlocking buttons and open the battery compartment
cover .
Press the ON/OFF button to switch the bodypack receiver/transmitter
on. The red LED lights up.
To switch the bodypack receiver/transmitter off, press the ON/OFF button
until “OFF” appears on the display. The red LED goes off.
Close the battery compartment. The battery compartment cover locks
into place with an audible click.
Switching the plug-on transmitter on/off
Press the ON/OFF button to switch the plug-on transmitter on. The red
LED * lights up.
To switch the plug-on transmitter off, press the ON/OFF button until
“OFF” appears on the display. The red LED * goes off.