Indications and displays on the receivers
Operation and battery status indication (EK 100 G2 only)
The red LED (LOW BAT/ON) provides information on the current operating state of the EK 100 G2:
Red LED lit up: | The receiver is switched on and the capacity of the bat- |
| teries/accupack BA 2015 is sufficient. |
Red LED flashing: | The batteries are/the accupack BA 2015 is going flat |
| (LOW BAT)! |
In addition, the
3 segments: | capacity approx. 100 % |
2 segments: | capacity approx. 70 % |
1 segment: | capacity approx. 30 % |
Battery icon flashing: | LOW BAT |
Transmitter battery status indication (EM 100 G2 only)
When the capacity of the transmitter batteries/accupack is so low that the batteries/accupack must soon be replaced (LOW BAT), the transmitter trans- mits information on its remaining battery/accupack capacity to the EM 100 G2 receiver and the transmitter low battery icon starts flashing on the receiver display panel.
EM 100 G2 |
EK 100 G2 |
“MUTE” display
The “MUTE” display or appears when
ythe RF signal of the received transmitter is too weak,
ythe received transmitter has been muted (with the pilot tone transmission or evaluation activated).
RF signal indication (EK 100 G2 only)
The green LED (RF) at the front of the EK 100 G2 lights up when an RF sig- nal is being received.
11
