38
... for multi-channel operation
yFor multi-channel operation, you can only use the channe ls in a channel
bank. Each of the channel banks “1” to “8” accommo dates four factory-
preset frequencies which are intermodulation-free. For alternative fre-
quency combinations, please refer to the enclosed frequency table. The fre-
ely selectable frequencies can be selected via the “TUNE” menu and can be
stored in the channel bank “U”.
yWhen using several transmitters simultaneously, interference can be avoi-
ded by maintaining a minimum distance of 20 cm between two transmit-
ters.
yUse special accessories for multi-channel applications (see: „Accessories“
on page 45).
Care and maintenance
Use a slightly damp cloth to clean the units from time to time.
Note:
Do not use any cleansing agents or solvents.
To clean the SKM100 G2’s sound inlet basket, proceed as follows:
Unscrew the sound inlet basket (turn counterclockwise) and remove it.
Remove the foam insert.
Use a slightly damp cloth to clean the sound inlet basket from the inside
and ouside.
Reinsert the foam insert.
Replace the sound inlet basket on the SKM 100 G2 and screw it tight
(taking care not to loose the colored identification ring).