Attaching the components to clothing | Sennheiser W100 guide

Attaching the components to clothing

Attaching the bodypack receiver/transmitter to clothing

The bodypack receiver/transmitter is attached to clothing (e.g. belt, waist- band) with the supplied belt clip.

The clip is detachable so that you can also attach the bodypack receiver/ transmitter with the antenna pointing downwards. To do so, withdraw the clip from its fixing points and attach it the other way round.

The BPP 1 bodypack pouch (available as an accessory) helps to protect the bodypack receiver/transmitter against moisture.

24

Image 24

Sennheiser W100 manual Attaching the components to clothing, Attaching the bodypack receiver/transmitter to clothing

Contents

100 Safety instructions Thank you for choosing Sennheiser Contents Evolution wireless series ew 100 G2 Channel bank system System variants Delivery includes Areas of application Power button Overview of operating controlsEM 100 G2 rack-mount receiver EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone Operation and battery status indication EK 100 G2 only Transmitter battery status indication EM 100 G2 onlyRF signal indication EK 100 G2 only Indications and displays on the receivers Modulation display of the receiving transmitter Pilot displayDiversity display EM 100 G2 only Display backlighting EK 100 G2 only Operation and battery status indication Indications and displays on the transmittersModulation display AF peak indication SK 100 G2 only Connecting the antennas Connecting the mains unitPreparing the components for use Mounting the receiver feet Connecting the amplifier/mixing console Service interfaceRack adapter and antenna mount accessories Bottom sides of the receivers Connecting units to the audio output Inserting and replacing the batteries Connecting the microphone/line cable Mounting the bodypack receiver to a camera Attaching the microphones Positioning the microphones Plugging the plug-on transmitter onto a microphone Changing the microphone head Using the components Switching the components on/offSwitching the rack-mount receiver on/off Switching the bodypack receiver/transmitter on/off Activating/deactivating the lock mode Switching the radiomicrophone on/offMuting the transmitters Muting the SK 100 G2 and SKP 100 G2 transmitters Attaching the components to clothing Attaching the bodypack receiver/transmitter to clothing Operating menu ButtonsOverview of menus Working with the operating menu Operating menu of the receivers Exit Name Exit Operating menu of the transmitters Disply Adjustment tips for the operating menu Switching between channel banksSwitching between the channels in a channel bank Adjusting the sensitivity transmitters only Multi-channel operationStarting the scan and storing the scan result Releasing locked channels Adjusting the audio output level receivers only Adjusting the squelch threshold receivers onlySpecial feature of the SKP 100 G2 plug-on transmitter Selecting the standard display Entering a name Loading the factory-preset default settings Activating/deactivating the pilot tone transmission orPilot tone evaluation Exiting the operating menu If problems occur Error checklist Recommendations and tips Care and maintenance For multi-channel operation Additional information HDX noise reduction Wireless transmission systems SquelchPilot tone squelch Field strength-dependent squelch Diversity reception Specifications SystemReceivers Connector assignment TransmittersMicrophones Microphone headsPage Accessories Warranty regulations Manufacturer declarationsCE Declaration Conformity Batteries or rechargeable batteries