MISFEED REMOVAL
When a misfeed has occurred during printing, the message "MISFEED HAS OCCURRED." will appear in the touch panel display of the operation panel and printing output will stop. The approximate locations of possible misfeeds are indicated by "" in the illustration below. The page numbers for detailed information for misfeed removal for each are also shown.
NOTE
Received faxes are all temporarily stored in memory. If a paper misfeed occurs, received faxes cannot be printed. When the misfeed is removed, the received faxes will print out automatically.
NOTES
●Be careful not to tear the misfed paper during removal.
●If paper is accidentally torn during removal, be sure to remove all pieces.
●Take care not to damage or leave fingerprints on the transfer belt when removing the misfed paper.
CAUTION
The fusing unit is hot. Take care in removing paper.
Upper fusing unit | Fusing unit paper guide | Transfer belt |
Misfeed removal guidance can be displayed by touching the [INFORMATION] key on the touch panel after a misfeed has occurred.
INFORMATION