NORMAL COPYING

7 Select the desired output mode (see page

5-5).

2-SIDED COPY

OUTPUT

The sort mode is the default mode.

To select the group

mode, touch the [OUTPUT] key, then touch the [GROUP] key on the output setting screen, and then touch the [OK] key on the setting screen.

8 Use the numeric keys to set the desired

 

number of copies.

 

 

 

 

 

Up to 999 can be set.

 

If you are only making a

 

single

copy,

the copy

 

can be made with the

 

copy

number display

 

showing "0". Use the [C]

 

(clear) key to cancel an

 

entry if a mistake has

 

been made.

 

 

 

9 Press the [COLOR COPY START (

)]

 

or [BLACK COPY START (

 

)] key.

 

5

If the [C] key is pressed

while originals are being

scanned,

scanning

will

 

stop.

If

copying

had

 

already started, copying

 

and scanning

will stop

 

after

the original

in

 

progress is output to the

 

original

exit

area.

In

 

these

cases

the copy

 

quantity will be reset to "0".

NOTE

The 1-sided to 1-sided copying mode is set as the default in the initial settings. If the default setting has not been changed using the "Initial status settings" program (key operator program), steps 3 to 5 on page 5-2can be omitted.

5-3