REVERSING AUTOMATIC DOCUMENT FEEDER

The reversing automatic document feeder can be used to automatically feed originals for continuous copying. Both sides of two-sided sheet originals can be scanned without having to manually turn the originals over. This feature is convenient for making copies of a large number of originals.

Acceptable originals

A stack of up to 100 original sheets (8-1/2" x 11" (A4) size, 21 lbs. (80 g/m2)) of the same size paper can be set in the document feeder tray. Originals of mixed size can be set if the width of the originals is the same.

■Size and weight of acceptable originals

5-1/2" x 8-1/2"

 

 

 

 

 

 

or A5

 

 

 

 

 

Original size:

 

 

11" x 17"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or A3

 

(148 x 210 mm)

 

 

 

 

 

(297 x 420 mm)

Weight (thickness):

 

 

 

 

 

 

 

 

 

 

 

 

 

one-sided original:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14 lbs. or 50g/m2

54 lbs. or 200g/m 2

 

 

 

 

 

 

two-sided original:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14 lbs. or 50g/m2

42 lbs. or 156 g/m2

g/m2 ... Weight of a sheet of paper of 1 m2

■Total number of originals that can be set in the document feeder tray

●100 pages (8-1/2" x 11" (A4) size originals weighing 21 lbs. (80 g/m2)) (For originals heavier than 21 lbs. (80 g/m2), the maximum stack thickness is 13/32" (10 mm).)

●60 pages (8-1/2" x 14" (B4) size or larger originals weighing 21 lbs. (80 g/m2))

(For originals heavier than 21 lbs. (80 g/m2), the maximum stack thickness is 64" (6 mm).)

4

Notes on use of the reversing automatic document feeder

●Use originals within the specified size and weight ranges. Use of originals out of the specified range may cause an original misfeed.

●Before loading originals into the document feeder tray, be sure to remove any staples or paper clips.

●If originals have damp spots from correction fluid, ink or glue from pasteups, be sure they are dried before they are fed. If not, the interior of the document feeder or the document glass may be soiled.

●To prevent incorrect original size detection, original misfeeds or smudges on copies, use the following as a guide for feeding originals.

Transparency film, tracing paper, carbon paper, thermal paper or originals printed with thermal transfer ink ribbon should not be fed through the document feeder. Originals to be fed through the feeder should not be damaged, crumpled or folded or have loosely pasted paper on them or cutouts in them. Originals with multiple punched holes other than two-hole or three-hole punched paper may not feed correctly.

●When using originals with two or three holes, place them so that the punched edge is at a position other than the feed slot.

Hole positions

Hole positions

Hole positions

4-5