Sharp AR-BC320 Touch Panel (main screen of copy mode)

PART NAMES AND FUNCTIONS (The Reversing Automatic Document Feeder)

Touch Panel (main screen of copy mode)

The main screen of copy mode shows messages and keys necessary for copying and settings that can be selected. Touch a key to make a selection. The main screen of the copy mode will be displayed when the [COPY] key is pressed.*

	READY TO COPY.							0
					INTERRUPT
							AUTO
			ORIGINAL		8½x11
SPECIAL MODES						ORIGINAL
				PLAIN			AUTO
						EXPOSURE
2-SIDED COPY				5½x8½
						AUTO 8½x11
		8½x11				PAPER SELECT
	OUTPUT	DUPLEX
		8½x11				100%
		11x17
						COPY RATIO

*Except when the custom settings screen is displayed.

The screen at left shows the machine with the duplex module/2 x 500 sheet paper drawer and the duplex bypass/ inverter unit installed.

The image will vary depending on the equipment installed.

Message display

Basic status messages are displayed here.

[INTERRUPT] key display area

When interrupt copy is available, the [INTERRUPT] key will be displayed here. When an interrupt copy job is being run, a [CANCEL] key will be displayed here to be used for canceling the interrupt copy job.

Copy quantity display

Displays the selected number of copies before the [START] key is pressed or the number of remaining copies after the [START] key is pressed. A single copy can be made when "0" displayed.

[2-SIDED COPY] key (page 5-6,5-9)

Touch to display the duplex copy mode setting screen.

[OUTPUT] key (page 5-3,5-8)

Touch to select sort, group, and staple sort.

[SPECIAL MODES] key (page 6-2)

Touch to display the special modes selection screen.

Original feed display

This lights steadily when an original is placed on the original table of the reversing automatic document feeder. When "Stream feeding mode" in the key operator programs is turned on, the display blinks during the waiting period (about 5 seconds) for placement of the next original. (See page 12 of the key operator's guide.)

Paper size display

The display shows the location of the paper trays, the size of the paper in the trays and the approximate amount of paper loaded in each tray. The approximate

amount of paper in a tray is indicated by .

Original size display

Displays the original size only when an original is placed for copying.

Original display

"AUTO" appears when the automatic original size detection function is operating, and the original size appears when the original size has been entered manually.

[ORIGINAL] key

Use this key to manually enter the original size.

Exposure display

Displays the icon of the selected resolution and the exposure scale.

[EXPOSURE] key (page 5-10)

Use this key to adjust the copy exposure.

Paper select display

Displays the selected paper size. When the auto paper select mode has been selected, "AUTO" will be displayed.

[PAPER SELECT] key (page 5-2,5-7)

Use this key to select the paper size.

Copy ratio display

Displays the selected copy ratio.

[COPY RATIO] key (page 5-13)

Use this key to select the copy ratio.

4-4