KEY OPERATOR PROGRAMS
Add or Change Extra Preset Ratios
Two extra preset copy ratios can be added within both the reduction range (25% to 99%) and the enlargement range (101% to 400%). Only added preset copy ratios can be changed. The standard preset copy ratios are fixed in memory and cannot be changed.
When the “ADD OR CHANGE EXTRA PRESET RATIOS” key is pressed, the following display will appear.
KEY OPERATOR PROGRAMS
ADD OR | CHANGE | EXTRA |
PRESET | RATIOS | OK |
SELECT THE RATIO TO BE ADDED OR CHANGED AND
SET NEW PRESET RATIO.
REDUCTION ENLARGEMENT
60
(25~99)(101~400)
1.Press a key under “REDUCTION” or “ENLARGEMENT” on the touch panel.
●The selected key will be highlighted.
2.Use the 
and 
keys to set the desired copy ratio.
●To decrease or increase the copy ratio rapidly, press and hold
the 
or 
key.
●To add or change other extra preset copy ratios, repeat steps 1 and 2.
●To cancel an extra preset ratio, select the copy ratio and press the CLEAR ( C ) key.
3.Press the “OK” key.
Setting a Maximum Number of Copies
Use this program to limit the maximum number of copies per copy run which can be input in the copy quantity display.
When the “SETTING A MAXIMUM NUMBER OF COPIES” key is pressed, the following display will appear.
KEY OPERATOR PROGRAMS |
|
SETTING A MAXIMUM | OK |
NUMBER OF COPIES | |
INPUT THE NUMBER AND PRESS [OK]. | |
MAXIMUM NUMBER OF COPIES | |
165 | (1~999) |
1.Input the number using the 10-key pad.
● A number from 1 to 999 can be set.
2.Press the “OK” key.
19
